New Year Dyno Day at Maximum PSI!

[Nj85'325]

http://gandpmedia.com/BMW/Newyeardyno.jpg
Come out and have a good time like we always do.

[a32guy]

ORLY? Hmmm.

[Nj85'325]

rly

[multiplex]

paging jon kensy

[Nj85'325]

paging jon kensy

Kensy? Kensy? Kensy? Kensy? Kensy? Kensy? Kensy?(hour later) Kensy? Kensy? Kensy? Kensy?

[a32guy]

Kensy? Kensy? Kensy? Kensy? Kensy? Kensy? Kensy?(hour later) Kensy? Kensy? Kensy? Kensy?

http://www.paulandstorm.com/tournament/images/benstein.jpg

I'd make the trip to see a wastegate spring pull!

[DrivenInnov]

Dan, you should promote this as "special guest Jon Kensy and his Turbo E34"! Also many other celebrity guests! haha

Jon I would love to see you come to this little event!

Jay you coming?


Tom

[milKt]

http://www.nlm.nih.gov/medlineplus/ency/images/ency/fullsize/9015.jpg

[Z3speed4me]

I will be spectatifying

[themadhatter]

hmmmmm

[SiGmA]

paging jon kensySrsly! Jon, get there at 9:30, have Mike tune her on high boost, and then lay down the highest numbers of the day!!

[bubela]

Srsly! Jon, get there at 9:30, have Mike tune her on high boost, and then lay down the highest numbers of the day!!


Until I get there.

[BadBoostedBmwM3]

I soooooooo wish I could come!

[///M3 CRAZY]

hmmmmm

+1

[Sniz]

wish my car was ready i'd love to come up :(

[RK-Tunes]

my car will hopfuly be running by then

i would love to seee what i can do on low boost

[xsport652]

ahhhhh.....another one I'll be at school for.

have fun guys! :buttrock

[xcelerate]

Finally, I will be there. Let see what my Ebay set up can do on the dyno.

[RK-Tunes]

x2 ^^^^ (if i can get my bitch started)
too bad im only on low boost still

[CrazyxMidget]

I'll be there :buttrock

[Nj85'325]

Nice guys. Remember this is not BMW specific. Any 2wd car. The more the merrier!

[CrazyxMidget]

Made it facebook official because I'm just that bored :shifty


http://www.facebook.com/event.php?eid=251182768963&ref=mf

[Z3speed4me]

Let's spread the word guys, and try to get some serious HP cars over there this time!

[Nj85'325]

Nitrous M3 or Turbo E30 :shifty

[a32guy]

Nitrous M3 or Turbo E30 :shifty

I mean, neither will be running by the time dyno day is here. :D

[Nj85'325]

Facebook rulez! Day/Night of mayhem:rofl


I mean, neither will be running by the time dyno day is here. :D

Besides the 95's wheel almost falling off yesterday. Its ready to roll son!

[a32guy]

wheel bolts are overrated

[5mall5nail5]

Kensy? Kensy? Kensy? Kensy? Kensy? Kensy? Kensy?(hour later) Kensy? Kensy? Kensy? Kensy?

Haha I need to dominate that thing for half a day :) I may come up to check it out though. My target is mid - late Feb - shot Radow a PMz already

[Nj85'325]

Haha I need to dominate that thing for half a day :) I may come up to check it out though. My target is mid - late Feb - shot Radow a PMz already



Quickest BMW in the US - BMW SOB's turbo E30 - 9.26@154.83
Quickest and fastest E36 in the US - 97 turbo M3 - 9.76@154.88
Turbo 08 Ninja 250R
Maximum PSI, LLC
7 McCandless St.
Linden, NJ 07036
908-290-3571
www.maximumpsi.com (http://www.maximumpsi.com/)
Please no PM's! Email us at sales@maximumpsi.com!
New 2WD Mustang chassis dyno!
Your one stop shop for turbo and sc kits/parts/fabrication/turn-key builds
Plug and play AEM standalone systems.Turbo Scavenge pump kits.Driveshaft loops.Custom fabrication.Roll bars/cages.Ceramic/Powder coating
Distributor for: Active Autowerke.Technique Tuning.ATP Turbo.Tony 1.VAC Motorsports.Horsepower Freaks.Steedspeed.Garrett.Precision Turbo.TiAL.UUC.Clutch Masters.Forced Performance.OEM parts

NO PMS JON! But 4srs. Be there. Even if you don't dyno.

[5mall5nail5]

Yeah it sounds fun I will def try and get up there, maybe Jay will tag along

[Nj85'325]

Join the facebook group!

http://www.facebook.com/home.php?#/event.php?eid=251182768963&ref=ts

[jayzx7]

i'll be showing up

[bimmergurl163]

I will for sure be there, I wish I had my new trans in to test out on the dyno.

[blakbimmer]

Ill in...sans boost though

[///M3 CRAZY]

Nice guys. Remember this is not BMW specific. Any 2wd car. The more the merrier!

so i technically wouldn't be crashing!

[Nj85'325]

so i technically wouldn't be crashing!

All 2wd welcome. Bring the ZO6!

[jayzx7]

so i technically wouldn't be crashing!
yes bring that car i'm tying to get my buddy with a c6 h/c and nos set up to come

[Z3speed4me]

I will for sure be there, I wish I had my new trans in to test out on the dyno.

Get all those guys you know to come too with all their crazy power cars that they never really seem to drive.

[///M3 CRAZY]

yes bring that car i'm tying to get my buddy with a c6 h/c and nos set up to come

nice! that sounds like a fun ride. ls2 or ls3? how much spray?

[bimmergurl163]

Get all those guys you know to come too with all their crazy power cars that they never really seem to drive.

Lol, yea right. They are all talk. My friend with the zo6 probably would have came, but his car is all apart. I sent out some invites though on facebook, so i hope i get a few people to go.

[jayzx7]

nice! that sounds like a fun ride. ls2 or ls3? how much spray?
ls2 i think a 150 shot he still hasn't used it. you have a h/c right? would love to see that thing go great color

[///M3 CRAZY]

ls2 i think a 150 shot he still hasn't used it. you have a h/c right? would love to see that thing go great color

yes i do... you can see a few vids on youtube. search for 7literheater.


as far as the dyno day when is the cutoff for signing up?

[BadBoostedBmwM3]

yes i do... you can see a few vids on youtube. search for 7literheater.


as far as the dyno day when is the cutoff for signing up?

Your z06 has like a ls6 or ls7 right??

[///M3 CRAZY]

Your z06 has like a ls6 or ls7 right??

ls7

BTW is the AFR meter a replacement O2 sensor or is it a sniffer in the back?

[Z3speed4me]

as far as the dyno day when is the cutoff for signing up?

I'd bet you could just show up that day and be fine... They are there kinda just a little bit late sometimes :stickoutt.

[Nj85'325]

ls7

BTW is the AFR meter a replacement O2 sensor or is it a sniffer in the back?

Can be used as both but typically used as a sniffer.

[///M3 CRAZY]

Can be used as both but typically used as a sniffer.

thank you. and that is what i would prefer anyway since i am not running boost or need to be too worried about it.

[Nj85'325]

Its good to make sure your AFR is good with nitrous. Of course the print out will have it and it will also have vac. if you want it.

[///M3 CRAZY]

Its good to make sure your AFR is good with nitrous. Of course the print out will have it and it will also have vac. if you want it.

i'm fully N/A, so i don't care as much.

[Nj85'325]

Hey guys and gal, lets get a list going so I know how many cars and who's they are. Also need them for the hat picking.

Il update the OP daily.

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2.
3.
4.
5.
6.
7.
8.
9.
10.

[jayzx7]

i'll be there

[Nj85'325]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3.
4.
5.
6.
7.
8.
9.
10.

[hc1001]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4.
5.
6.
7.
8.
9.
10.

[blakbimmer]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5.
6.
7.
8.
9.
10.

[BobRoss]

Is it a 10 car day)

[bubela]

I don't see why I wouldn't be there, weather permitting..

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.
7.
8.
9.
10.

[xcelerate]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.(Xcelerate)1993 325i
7.
8.
9.
10.

[ozkm3]

i'll like to know what im making b4 the power mods go in my track rat...no boost here, is it ok if i show up???

[Z3speed4me]

Of course it is.... last dyno day there were some NA guys, no problem with knowing your numbers!


Are we doing guessing bets again this time? I'll bring some singles and fivers. :D

[themadhatter]

Of course it is.... last dyno day there were some NA guys, no problem with knowing your numbers!


Are we doing guessing bets again this time? I'll bring some singles and fivers. :D
yes, if I show up, we're gambling.

[B Marques]

yes, if I show up, we're gambling.

+1

[(V)3]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.(Xcelerate)1993 325i
7. qtran ((V)3) +1
8.
9.
10.

[Nj85'325]

Bring your singles!

[(V)3]

Bring your singles!

what?? who said strippers?

[bmw327]

Hey, if you all want a giggle I'll bring the old M42 equipped 318i. It might be interesting to see how much power the old thing actually has after 20 years of use. FWIW, it still feels pretty peppy...

[Nj85'325]

Hey, if you all want a giggle I'll bring the old M42 equipped 318i. It might be interesting to see how much power the old thing actually has after 20 years of use. FWIW, it still feels pretty peppy...

Bring it. Add your name to the list. It will be good for the betting portion of the day. Some how Sam always wins though :mad

[GimmieSumMo72]

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.(Xcelerate)1993 325i
7. qtran ((V)3) +1
8. (GimmieSumMo72) '91 850i
9.
10.

[B Marques]

i have a 413 red label ecu from a rms stage 2 10lb kit with 42lb injectors. if anyone has this setup and would like to try out the tune of felix medina i would allow them to try it out and do a dyno pull before buying it off of me. let me know if anyone interested.

[sbblowz]

ill drop the e30 off tomorrow and hopefully u guys can have it ready to run on the dyno. nothing crazy wrong. just an exhaust leak and a boost leak somewhere.

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.(Xcelerate)1993 325i
7. qtran ((V)3) +1
8. (GimmieSumMo72) '91 850i
9. Karan (sbblowz) 90 m3
10.

[hookenM]

quick question. does it have to be bmw only? i might bring my 337 gti by and see how its running

[Nj85'325]

Open to all 2wd cars. Bring your friends! The more the merrier! Its good to have a nice mix of cars. Turbo, S/C, N/A, Nitrous.

[blakbimmer]

looks like snow is in the forecast :(

[a32guy]

Hmmm juicebox should be in by then :shifty

[Nj85'325]

Hmmm juicebox should be in by then :shifty

Drag Bowen's lazy ass down..

[a32guy]

Drag Bowen's lazy ass down..

My motor would probably pop with him just looking at the car.

[So Live]

My motor would probably pop with him just looking at the car.

Probably right... :devillook

Just cause you said that, dont be surprised

[Nj85'325]

Probably right... :devillook

Just cause you said that, dont be surprised

Don't window his block too. But srsly, come SAN!

[hookenM]

quick question, i have a exhaust leak, im not 100% where, ive had it since i bought the car. the seller told me that its where the Downpipe connects to the catback. now my question is can you guys fix the problem and can you remove my muffler so my car is straight piped? thx :)

[Colby Colbs]

Id like to come but things are wayyy crazy...

[Nj85'325]

quick question, i have a exhaust leak, im not 100% where, ive had it since i bought the car. the seller told me that its where the Downpipe connects to the catback. now my question is can you guys fix the problem and can you remove my muffler so my car is straight piped? thx :)

We have the technology. Email Sales@MaximumPSI.com for the fastest response. Thanks.


Id like to come but things are wayyy crazy...

Colbs, hope everything is going good. Wish you could make it.

[hookenM]

hmmm quick question. can i do 1 pull with my car with the exhaust leak and then use the other 2 pulls once you guys fix the leak and straight pipe?

[a32guy]

Busy week(end) but gonna try to make an appearance with bowen and a buddy. Get the suds ready.

[Nj85'325]

Busy week(end) but gonna try to make an appearance with bowen and a buddy. Get the suds ready.

Come and I'll deliver.

[hookenM]

We have the technology. Email Sales@MaximumPSI.com for the fastest response. Thanks.


hey man i sent an e-mail and havnt gotten a response yet

[mike radowski]

replied

[Nj85'325]

Looks like the storm took a different path. Looking like we are snow free for Saturday so all you good weather drivers can come!

[CrazyxMidget]

Can't wait :redspot

[Nj85'325]

Will it be plumbed in time?
http://hphotos-snc3.fbcdn.net/hs208.snc3/21571_275822622540_676172540_3856722_2164740_n.jpg

[F360C]

I think I am going to hit this up... do we have to sign up or just show up? Also can you set the car in dyno mode or what ever it is so I can go past 6500 rpm?

[hellrot98m3]

bringing my buddy with me, if he gets his car insured in time that will be another for the dyno.

1. Dan Graham (NJ85'325) 1995 M3 or 85 325
2. Jay M (Jayzx7) S/C Kraut Vert
3. Howie (hc1001) 98 M3
4. Ted (blakbimmer) 05 M3
5. Bob (bubela) 318ti
6.(Xcelerate)1993 325i
7. qtran ((V)3) +1
8. (GimmieSumMo72) '91 850i
9. Karan (sbblowz) 90 m3
10.chris (hellrot98m3) 99 m3
11. pat (crazyxmidget) 95 m3

[Nj85'325]

Looks like no snow. It will be cold but we should be packing it in. Everyone show up.

[mike radowski]

I think I am going to hit this up... do we have to sign up or just show up? Also can you set the car in dyno mode or what ever it is so I can go past 6500 rpm?


Come on down. Yes, we should be able to get it to rev past 6500.

[Z3speed4me]

bringing my buddy with me, if he gets his car insured in time that will be another for the dyno.



Chris, you are TT stg 2 now right?

[bubela]

Doing this today was not fun outside. I'm sure tomorrow will be even better.


http://farm3.static.flickr.com/2462/4314771930_9542cc0003_b.jpg


See you tomorrow.

[Nj85'325]

Doing this today was not fun outside. I'm sure tomorrow will be even better.


http://farm3.static.flickr.com/2462/4314771930_9542cc0003_b.jpg


See you tomorrow.

FINALLY! I get to see your car. Kensy take note and do the same!

[BadBoostedBmwM3]

Will it be plumbed in time?


I guess this is on the 95 m3??

[F360C]

Come on down. Yes, we should be able to get it to rev past 6500.

Great! I am going to come on by then and I think my brother is going to bring his M Coupe by too!

[Nj85'325]

I guess this is on the 95 m3??

Ya but I have been super busy so its not done. Il have a write up on it.

[jayzx7]

Ya but I have been super busy so its not done. Il have a write up on it.
boo come on get to work on it. i wanted to see that thing go

[CrazyxMidget]

Dan's e36 put down really good numbers last time... should be interesting if he gets it done in time

[Nj85'325]

Dan's e36 put down really good numbers last time... should be interesting if he gets it done in time

She won't be dyno'ing. Unless I work on it threw out the day and steal Marc's bottle. Still have to get mine filled.

We will see.

Anyway! BUMP for today! Its chilly out but no precipitation in the mix! See EVERYONE! at 11!

[sbblowz]

what kind of food?

[milKt]

what kind of food?

Saliva and strippers?

[Z3speed4me]

It's 15 degrees out, that's warm! It was -7 at the top of hunter yesterday! Really hope everyone shows up as they claim, camera batteries chargin up now :redspot

Dress warm, I dunno how hot the shop is in the dead of winter when that door is open.

[jayzx7]

getting ready to leave hope i don't freeze on the way

[RK-Tunes]

dam
i wish i could make it
but im stuck thowing a motor back into my car today

[5mall5nail5]

Yeah I would have liked to come out today but work for work and work for car took over :( Did manage to fix my fuel pressure though!

[CrazyxMidget]

Whoever has the blue e36 (plate #NEH65R), we think we left our remote mouse inside your car. Call the shop or just stop by


edit: nevermind :shifty

[F360C]

Whoever has the blue e36 (plate #NEH65R), we think we left our remote mouse inside your car. Call the shop or just stop by


edit: nevermind :shifty

HAHA my brother almost drove off with it too!

Had alot of fun today guys... Big thanks to the guys at Maxium PSI for setting up these fill day! Nice shop and really nice guys that work there!

[multiplex]

Numbers?

[F360C]

Numbers?

I put down 306rwhp and my brother put down 284rwhp in his m coupe.

No idea at all why his car was so far down on power compared to mine...the mods on the cars are identical except for I have an intake and he has an x-pipe

[5mall5nail5]

Anxious to see some videos!

[Captain]

I put down 306rwhp and my brother put down 284rwhp in his m coupe.

No idea at all why his car was so far down on power compared to mine...the mods on the cars are identical except for I have an intake and he has an x-pipe

Mind listing the mods? and you are both s54 correct?

[F360C]

Mind listing the mods? and you are both s54 correct?

Yep both are S54 Z4 M Coupe

In terms of engine mods I have:
ESS software
JVT headers
SuperSprint Race Mufflers
AFE Intake

He has:
ESS software
JVT Headers
SuperSprint Race Mufflers
SuperSprint X-Pipe

The guys at Maxium PSI seem to think that since he hasn't driven his car in a month that the adaptations might have caused it to not make full power. My car made 304,304 then 306rwhp on my pulls. His car was 274,278, then 284 0for the three pulls. So it seems the more he redlined the car the more power it made.

EDIT... I forgot to mention that we have been on the track and lined up on the straight away many times and neither car pulls on the other so they seem from that to be making the same power. Maybe something set wrong on the dyno?

[milKt]

Anyone home yet w/ vids?

[hc1001]

Good dyno day. Thanks Maximum PSI.
Too bad it was freezing and i am feeling under the weather. Heres my sheet.

Mods: Dinan stage V software, Dinan 3.5 CAI, Dinan 3.5 HFM, Samco3.5 to 3 intake elbow, Dinan BBTB, M50 Manifold, Evosport underdrive pullies, AA trackpipe, and Dinan exhaust.

http://i154.photobucket.com/albums/s264/hc1001/Car/Dyno.jpg

[hookenM]

I was the guy with the 337 Gti. Just got home, i wasnt looking for crazy results since this is exactly how i bought the car. once i fix my exhaust leak, straight pipe, get lighter pulleys, light flywheel and stg2 clutch, and a fmic possibly ill be back to see true and better results, good shit today thought, glad to see everyone there

[F360C]

heres my short vid from the blackberry...

http://www.youtube.com/watch?v=xAodCLja4C4

[bubela]

Wow.. What a day.

Got to see some cool cars and meet some cool people and eat some not so "cool" chicken. That was some good spice!

I'm pleased with aprox 10psi and breaking up around 6,000 rpm. Thanks to Mike R for taking a few minutes to make some modifications to my tune that will help let my head gasket see a few more days.

http://farm5.static.flickr.com/4064/4317003687_7c6db5ed08_b.jpg

[GimmieSumMo72]

850i Dyno (http://www.bimmerboard.com/members/gimmiesummo72/original/850i%20Dyno%20013010.jpg)

Mods listed in sig

[spinny201]

http://www.youtube.com/watch?v=W_0rQnEfG5Q

Wish we knew how to properly dyno the car so it wasn't in limp mode, would have loved to had it rev to 8400rpm but it was really cutting out at 7000 and by 7400 it wouldn't pull anymore :(

[jayzx7]

good times today some nice cars that mustang was nice.

[a32guy]

Wish I made it, but was really turned off when I woke up hungover and looked at the temperature of 14 degrees.

In for vids!

[Friedman]

It was really cold at Maximum today but it was well worth going! I think we had a pritty good turnout too. I was there for a few hours and not a second went by without a car on the dyno.

[spinny201]

Did the mustang ever make it on the dyno?

[MMR]

http://www.youtube.com/watch?v=W_0rQnEfG5Q

Wish we knew how to properly dyno the car so it wasn't in limp mode, would have loved to had it rev to 8400rpm but it was really cutting out at 7000 and by 7400 it wouldn't pull anymore :(


Car sounds good. What exhaust?

[jayzx7]

Did the mustang ever make it on the dyno?
no but he got it running. the car sounded great

[spinny201]

Car sounds good. What exhaust?

Thanks! It's an RPI GT Exhaust.


no but he got it running. the car sounded great

Damn!! Why didn't he dyno it??

[Z3speed4me]

Editing pics now.... geeze I am lazy, probably won't finish them.

[spinny201]

editing pics now.... Geeze i am lazy, probably won't finish them.


pix!

[mike radowski]

Thanks! It's an RPI GT Exhaust.



Damn!! Why didn't he dyno it??

It was dropped off for exhaust work and some other things. I don't know if he is planning on throwing it on the dyno, but if we do I'll grab some video and post it up.

[LostMarine]

Did anyone get any clean shots or video of mine? I met and talked to a few guys yesterday, cool guys. Here is my original from a month ago:

http://i114.photobucket.com/albums/n248/steven09999/SteveNdyno.jpg


and then yesterdays, Im pretty happy..Keep in mind I'm Beta testing new software so its not anywhere near finalized yet. Ill be visting again after the Meth install ;)

http://i114.photobucket.com/albums/n248/steven09999/JB320DYNO.jpg

http://i114.photobucket.com/albums/n248/steven09999/20DYNO1.jpg

[spinny201]

Did anyone get any clean shots or video of mine? I met and talked to a few guys yesterday, cool guys. Here is my original from a month ago:




and then yesterdays, Im pretty happy..Keep in mind I'm Beta testing new software so its not anywhere near finalized yet. Ill be visting again after the Meth install ;)





We should do some pulls!

[LostMarine]

We should do some pulls!

I was thinking that when i asked who's car it was, but i didn't want to sound like a dick :D

[Captain]

I was thinking that when i asked who's car it was, but i didn't want to sound like a dick :D

Welcome lostmarine, it seems you have done some things to that 335 of yours?

How bout some details?

We live for this ish, and it seems you could keep us alive for another minute. What up, talk about it!!!! Formal request. lol :D

[CrazyxMidget]

Editing pics now.... geeze I am lazy, probably won't finish them.
Finish them right meow!

[LostMarine]

No problem!

2007 335I Sparkling Graphite
6spd Auto- Dual Cone Intake/JB3 2.0 Beta/RR 3" ***less Downpipes/Miltek ***less Exhaust/Helix FMIC/ Z-Shift BOV/RPI Ram Air Scoops/RiXst3R P3 Boost guage (you all seemed to love that so had to throw that out there)
And thats about it for performance.. Oh yeah, I have a BMS/CM Methanol kit sittin in the kitchen waiting to be installed and trying to schedule an LSD install by MAXPSI, and I have a set of 17" Kosei's with DR's waiting for Atco to open up..

[xsport652]

Can we please set another one of these up in the summer. I'm always at school when they go on.

[LostMarine]

Who was the guy there snappingpics with the prof looking camera? Wearing a green beany?

[sbblowz]

Who was the guy there snappingpics with the prof looking camera? Wearing a green beany?

was it the video camera dude or dude with camera. video dude is kenny username driftm42kano. the guy with the camera was also kenny lol. his username is z3speed4me

[F360C]

Does anybody know if these numbers were corrected?

[LostMarine]

uncorrected, he said correction factor was only .1 or 1%, something insignificant like that


was it the video camera dude or dude with camera. video dude is kenny username driftm42kano. the guy with the camera was also kenny lol. his username is z3speed4me


Are either of them gonna post them up?

[a32guy]

uncorrected, he said correction factor was only .1 or 1%, something insignificant like that

What map were those two pulls on?

Dan or Mike, you guys grab AFR on those pulls? Would be interesting to see. Thanks!

[spinny201]

I was thinking that when i asked who's car it was, but i didn't want to sound like a dick :D

Not at all man! I'd be interested to see how the cars do against each other.

I'd like to do some 50-150 pulls!

[turbo b]

so which car put down the most horse power for the day??

[jayzx7]

so which car put down the most horse power for the day??
integra i think 514

[Z3speed4me]

Really gotta do some of these over again, wayyy overly contrasty, didn't update my camera raw for the 7D yet, so working off jpeg so gotta go back later and redo a lot of them that need some help.


But here is my flickr link.

http://www.flickr.com/photos/kmeisch/sets/72157623324257894/

[5mall5nail5]

So did the single turbo V8 thing run???

[Z3speed4me]

Negativo... no mustang, getting an exhaust done, as Mike said above, if it goes on the dyno sometime in the future he'll update us.

[LostMarine]

What map were those two pulls on?

Dan or Mike, you guys grab AFR on those pulls? Would be interesting to see. Thanks!

both on map 7, i was gonna try 8 for sh*ts but i was already getting heatsoaked



Not at all man! I'd be interested to see how the cars do against each other.

I'd like to do some 50-150 pulls!

i thought so but ya never know when dealing with bimmer owners.. especially ///M owners ;)


id be down for that,I have a new camera mount to try out and just gotta put the new shoes on her. I think think meth is going in this weekend and that should be exciting..

[spinny201]

both on map 7, i was gonna try 8 for sh*ts but i was already getting heatsoaked




i thought so but ya never know when dealing with bimmer owners.. especially ///M owners ;)


id be down for that,I have a new camera mount to try out and just gotta put the new shoes on her. I think think meth is going in this weekend and that should be exciting..

haha nah I'm not a dick, it's just a car and someone always has something faster!

Let me know when you want to do some pulls, do it while it's cold out you'll get more hp!! :)

[LostMarine]

haha nah I'm not a dick, it's just a car and someone always has something faster!

Let me know when you want to do some pulls, do it while it's cold out you'll get more hp!! :)

thats only for you my friend, once meth goes in it aint gonna matter for me :buttrock

[Z3speed4me]

Can we keep this to the dyno day, we do have PM for a reason guys :)

[LostMarine]

..sorry..

do they really have a dyno-day every month? When is the next one?

[mlee4984]

Just did an inspection on my Dixis exhaust tips... that metal clamp dented and scraped my exhaust... :mad

[Z3speed4me]

I have no idea how often they are going to do this, probably not til it gets a little warmer out.




Just did an inspection on my Dixis exhaust tips... that metal clamp dented and scraped my exhaust... :mad

I have never seen that happen before, I've been on their dyno twice, and I know other guys that have dyno'd at multiple places 25-30 times and haven't had that happen. That's really weird actually. What are those tips made of, must be some super soft metal.

[mlee4984]

Dixis Titanium... I'm sad... hopefully I can try to repair it buy heating it with a torch and bending it slightly... FML
Thanks the posting the photos by the way.

http://www.youtube.com/watch?v=aZ7a8FO63xw
http://www.youtube.com/watch?v=T4Mb1zvlO6A&feature=related

-Mike

[BadBoostedBmwM3]

I put down 306rwhp and my brother put down 284rwhp in his m coupe.

No idea at all why his car was so far down on power compared to mine...the mods on the cars are identical except for I have an intake and he has an x-pipe

Those are great numbers for a s54! Bravo...

[F360C]

Those are great numbers for a s54! Bravo...

Yea I was really happy with them! The only problem is that they are so good that the owner of PSI in flordia on another forum is calling bullshit and saying that the dyno owner is "ignorant and they must be hugely corrected numbers"

[So Live]

Yea I was really happy with them! The only problem is that they are so good that the owner of PSI in flordia on another forum is calling bullshit and saying that the dyno owner is "ignorant and they must be hugely corrected numbers"

I think you should come to CT and dyno at one of the premiere BMW shops up here... :D

And who really cares? Dyno isnt a great measure of anything except how big your e-cock is cause they are all different.

[BadBoostedBmwM3]

Yea I was really happy with them! The only problem is that they are so good that the owner of PSI in flordia on another forum is calling bullshit and saying that the dyno owner is "ignorant and they must be hugely corrected numbers"

That's odd bc the guys at PSI are usually getting good people. Anyways, I've seen similar numbers before on s54's (I've seen like 334whp on s54 with all your mods + cams). The best part is your m-coupe is so light. I bet with your HP and weight.... you could trap ~108mph.

[PathosRx]

Correct me if I'm wrong ... but a 1.8L was the top dog of the day? Had I known this, I would have shown up in my DD and represented for the BMW crowd ... :(

[mike radowski]

Does anybody know if these numbers were corrected?

They were corrected for temp and pressure. The final numbers had a correction factor of .987 that day so uncorrected would be higher.

[mike radowski]

Yea I was really happy with them! The only problem is that they are so good that the owner of PSI in flordia on another forum is calling bullshit and saying that the dyno owner is "ignorant and they must be hugely corrected numbers"

What do I have to gain by over-inflating the numbers on a dyno day with 15+ almost stock cars? It was a good day and we had a nice turnout even with the arctic weather. Here's a screenshot of the weather correction values for the dyno day.

-Mike

[CrazyxMidget]

Nice picture name Mike :rofl

[spinny201]

Hey Mike I think I figured out how to dyno the M5. You have to disconnect the wheel speed sensors. The dash will still light up like a Christmas tree but it will keep the car out of limp mode and let it rev all the way.

I can attest to the dyno #'s not being over inflated. Stock M5's make 380-390RWHP, with my mods I should be making 420-430WHP.

I dynoed at 417WHP @ 7400RPM, peak HP I believe is 7900RPM.

No doubt that with 70mph windflow, and hitting 8000RPM that I can put down over 420WHP on your dyno.

[Z3speed4me]

Nice picture name Mike :rofl

I saw that too...

Yea if you really have to prove to some guy that thinks the numbers are high, go to another shop....go to ICS they aren't that far from Spartaaaaaaa.
Remember their's is a dynojet and just *might* possibly read even higher than the MaxPSI one.

Every other car's numbers were pretty spot on as far as mods were concerned, I don't see why you give a crap what one single guy says.

Let alone he obviously is the ignorant one if he dares address the great one like that!

[ICS Performance]

I saw that too...

Yea if you really have to prove to some guy that thinks the numbers are high, go to another shop....go to ICS they aren't that far from Spartaaaaaaa.
Remember their's is a dynojet and just *might* possibly read even higher than the MaxPSI one.

Every other car's numbers were pretty spot on as far as mods were concerned, I don't see why you give a crap what one single guy says.

Let alone he obviously is the ignorant one if he dares address the great one like that!

If anyone is curious $60.00 with air fuel call for an appointment, or send us an email directly to Sales@icsperformance.com

-George Kakaletris

[Z3speed4me]

If anyone is curious $60.00 with air fuel call for an appointment............

Saw you guys have a dyno day in April coming up... is there a list for that yet? Might take the drive just to see if anything sick shows up!

[F360C]

What do I have to gain by over-inflating the numbers on a dyno day with 15+ almost stock cars? It was a good day and we had a nice turnout even with the arctic weather. Here's a screenshot of the weather correction values for the dyno day.

-Mike

That is what I keep trying to tell him... I even posted up one of the pics that shows the turbo teg dyno and how it is super small correction factor. Then he tells me that the only way my car put down 305whp is if the dyno was set up to read like a dyno jet. Which I then in turn told him it wasn't. Then he tries to tell me that if my dyno numbers where uncorrected that means my car would throw down 360whp on a dyno jet. Here is a link to the thread so you can read for your self all the bs he is saying about you and your shop. Maybe you could let him know how wrong he is! I for one was totaly happy with the dyno and the day at your shop and will be back to dyno again with more mods.

http://www.bimmerfest.com/forums/showthread.php?p=4901606&posted=1#post4901606


I saw that too...

Yea if you really have to prove to some guy that thinks the numbers are high, go to another shop....go to ICS they aren't that far from Spartaaaaaaa.
Remember their's is a dynojet and just *might* possibly read even higher than the MaxPSI one.

Every other car's numbers were pretty spot on as far as mods were concerned, I don't see why you give a crap what one single guy says.

Let alone he obviously is the ignorant one if he dares address the great one like that!

Basicly I am trying to defend what I thought was a great shop, great guys, and an EXCELLENT dyno operator that he keeps calling ignorant and hinky. I didn't want to see MaxPSI's name slandered like that.

[Z3speed4me]

That 335 guy my friend, like many....(not to generally strereotype :)) is living in a fairytale story where he has the fastest car in the world and obviously is an idiot.

[F360C]

That 335 guy my friend, like many....(not to generally strereotype :)) is living in a fairytale story where he has the fastest car in the world and obviously is an idiot.

Thanks for the help over there guys... I for one didn't want MaxPSI to be thrown under the bus like that. I originally made that post to see if anyobdy could have any ideas as to why his car made so much less whp but then he comes on there and starts calling out all the numbers saying that they have to be hugely corrected because there is no way my car can put down that power blah blah blah. He might have a point in that it might be the battery since it does't seem to want to hold a charge at all. As I said on there the battery will be replaced and the adaptations cleared at the same time. My brothers car has been driven as hard as mine from day one... every track day that I have done he has done (that is usually 2 a month plus autox's in the spring/summer) and we drive mostly the same on the street. The only difference was that his car hs sat has pretty much sat in the garage for the last month and a half.

Although he once did have a 335 I don't think he has it anymore... he now has a HPF Stage 3 and a NA M Coupe but still has that arrogant attitude. He is actually a member on here under the name "O-Cha" I don't know if he is the owner of PSI or is just an employee there.... I think he is the owner though

PS... your car gave me a hard on! Estroil with LM's FTW!!!! We need to go take some pics one day

[Z3speed4me]

We need to go take some pics one day

Apparently you can't receive pm's. Hit me up sometime and we can do a shoot when it's warmer out. Actually coming your way Friday and Saturday to spend the weekend at South Mountain over at the creek.

[mike radowski]

Basicly I am trying to defend what I thought was a great shop, great guys, and an EXCELLENT dyno operator that he keeps calling ignorant and hinky. I didn't want to see MaxPSI's name slandered like that.

I think the real question is why your car and your brother's car threw down such different numbers on the same day with the same dyno and mods. I was just throwing out a few possibilities why the other car had such a choppy graph up top and lower numbers. I wasn't claiming to be an expert on the Z4 S54 DME. You have a slightly different exhaust configuration and an aftermarket intake, and both of you claimed to have the same software. I said that what is working on your car might not be optimized for the other car. I also mentioned that if the other car was always limped around and driven lightly, it might dyno differently. After you guys told me you both drive like animals I tossed that out the window. It could be fuel, hardware, software, or a number of things. Sure it could be the dyno or the ignorant operator (me), but explain how we ran the cars back to back with the same dyno, weather correction, and dyno settings.

We dyno'd a car on our mustang, made 485whp corrected, and took it over to a local dynojet and it made 515 whp std correction. I don't have anything "adjusted" to read higher numbers. We have a 50lb weight to calibrate the load cell and we input the current pressure, temp, and humidity for the weather correction values.

Also, we can't dyno our own shop cars on our Mustang, they can't put the power down on the small rolls. At low boost my car always dyno's higher on a dynojet compared to our dyno.

[a32guy]

That 335 guy my friend, like many....(not to generally strereotype :)) is living in a fairytale story where he has the fastest car in the world and obviously is an idiot.

:shifty

[F360C]

It could be fuel, hardware, software, or a number of things. Sure it could be the dyno or the ignorant operator (me), but explain how we ran the cars back to back with the same dyno, weather correction, and dyno settings.

.

Yea there is def something up with his car.... it might be the battery but who knows. With how choppy his graph is it really makes me wonder. My runs are pretty much right on top of each other while his keep gaining power each run. The software is the exact same... the ECUs were sent off to ESS in the same box and flashed with the same software. I just want you to understand that I don't think it was an ignorant operator and thats why I kept trying to defend you in the face of o-cha/blau335's attacks on you. I agree since the cars were run on the same day on the same dyno within half an hour of each other it is def something up with his car and not the operator. I think once the battery is replaced on his car we are going to have to come down an redyno

[Z3speed4me]

:shifty

Ok 99% of 335 owners have that attitude... not all of them and thus you are probably in the 1%.
It's kinda like 99% of porsche drivers think they are gods gift to the world, or guidos think they are just gods gift to women, both living in a fantasy.


we are going to have to come down an redyno

And have photos taken...:redspot

[LostMarine]

since he is a former 335 owner, show him my dyno that was done right after yours, im putting out exactly what i should be with my mods on a Mustang.. should end the discussion..

[hc1001]

Yea there is def something up with his car.... it might be the battery but who knows. With how choppy his graph is it really makes me wonder. My runs are pretty much right on top of each other while his keep gaining power each run. The software is the exact same... the ECUs were sent off to ESS in the same box and flashed with the same software. I just want you to understand that I don't think it was an ignorant operator and thats why I kept trying to defend you in the face of o-cha/blau335's attacks on you. I agree since the cars were run on the same day on the same dyno within half an hour of each other it is def something up with his car and not the operator. I think once the battery is replaced on his car we are going to have to come down an redyno

hey man, my friend with the blue 06 ZCP M3 put down 281whp n 247lbs torque on his second run or maybe it was his first and he got 274 on his second... maximumpsi only did two dyno runs for some reason. i wonder if his third run would be higher. only mods were an air filter in the stock airbox and dixis exhaust. he did get teh ecu flashed by bmw for the O2 sensor fix. he noted that the flash made the engine much smoother than b4.

[Colby Colbs]

Also, we can't dyno our own shop cars on our Mustang, they can't put the power down on the small rolls. At low boost my car always dyno's higher on a dynojet compared to our dyno.

Mike Radowski FTMFW!

[F360C]

hey man, my friend with the blue 06 ZCP M3 put down 281whp n 247lbs torque on his second run or maybe it was his first and he got 274 on his second... maximumpsi only did two dyno runs for some reason. i wonder if his third run would be higher. only mods were an air filter in the stock airbox and dixis exhaust. he did get teh ecu flashed by bmw for the O2 sensor fix. he noted that the flash made the engine much smoother than b4.

Sorry to have mis quoted his numbers... i was going off memory. Although i didn't know what torque he put down. 247tq is pretty impressive!

Well the thread has been closed over at the fest. That is officially my first thread that has eve been closed!:redspot Although blau335 is pretty arrogant he brings of one good point besides the battery. Maybe my bro just got a bad batch of fuel that morning at shell and combine this with a weak battery it might be why his car was so far off mine? Looks like we are going to have to burn the gas off, change the battery, and clear the adaptations just for good measure then re-dyno.

Mike whens the next dyno day so we can see if it makes a difference?




And have photos taken...:redspot

Yes for sure! The shots you got already were great!


since he is a former 335 owner, show him my dyno that was done right after yours, im putting out exactly what i should be with my mods on a Mustang.. should end the discussion..

Ha that would have been a really good point to bring up and I would have loved to see his response to that but as I said the thread got closed

[Z3speed4me]

Honestly... those shots all SUCKED, they were in low light, all hand held and using iso like 1600 or something.

Whenever the next day is though, I will attend, hopefully my jacket airs out by then :(

[mlee4984]

hey man, my friend with the blue 06 ZCP M3 put down 281whp n 247lbs torque on his second run or maybe it was his first and he got 274 on his second... maximumpsi only did two dyno runs for some reason. i wonder if his third run would be higher. only mods were an air filter in the stock airbox and dixis exhaust. he did get teh ecu flashed by bmw for the O2 sensor fix. he noted that the flash made the engine much smoother than b4.

Hey Howie,

I was actually at 236 TQ... I have no TQ, haven't had a chance to scan the dyno sheet.

[WCM3]

I'm sad to see all this bickering after MaxPsi put on the dyno day for everyone. I'm sure Mike didn't fool with the numbers, so drop it.


Ok 99% of 335 owners have that attitude... not all of them and thus you are probably in the 1%.

This is true. I would like to believe I'm in that 1% as well. I think those that have/had boosted E36s understand that the N54 isn't as fast as that crew is making it out to be..

[F360C]

I'm sad to see all this bickering after MaxPsi put on the dyno day for everyone. I'm sure Mike didn't fool with the numbers, so drop it.



.

There has been no bickering at all on this forum. Nobody on here was questioning the numbers at all... the only person that seemed to not believe the dyno numbers was the owner of PSI in Flordia. Who when I posted up my dyno results over on bimmerfest said there no way my car could put down those numbers. Then he proceeded to call Mike ignorant and say he was screwing with his dyno to make it read high. All of us on here know that is FAR from the truth and as Mike pointed out what would that have gained him? Mike didn't do anything except put on a great day for all of us. All I have been trying to do is defend Mike and Max PSI against the attacks from PSI Florida

[mike radowski]

It's all good! We will have another dyno day here in a few weeks and I'll be sure to turn down the dynojet correction factor knob to keep everyone happy :shifty

[F360C]

It's all good! We will have another dyno day here in a few weeks and I'll be sure to turn down the dynojet correction factor knob to keep everyone happy :shifty

Sign me up! I am putting on my Turner Power Pulleys to see what kind of difference that makes.

Can we turn the correction factor up on the dynojet knob? Cause I need more power! I am hoping for some where near 600whp!:redspot

[Z3speed4me]

Interested in seeing what pulleys do on that motor, I have seen many mixed opinions but practically no real world results.

[PSangavaramM3]

i wanna dyno my e46 m3

[mlee4984]

Here are my results:
Drop in filter + Dixis muffler are the only mods and a dealer DME reflash
http://img718.imageshack.us/img718/5627/scan0001h.jpg

[mlee4984]

Back from the dead, are we going to have another dyno meet anytime soon?

[GG///M3]

Back from the dead, are we going to have another dyno meet anytime soon?

+1

[themadhatter]

I dunno how Mike would feel if some of us showed up with studded snow tires. :stickoutt

[GG///M3]

I dunno how Mike would feel if some of us showed up with studded snow tires. :stickoutt

:lol