Front control arm mounts....Help please

[mean green 540]

On the front control/Thrust arm mount there are two sets of holes. Why?
Are there two different arm lengths?
Which mounting holes should I use?
:help

[russiankid]

Use the hole that was used from factory.

[TheStigg]

The front cross member is shared with both the e34 and e32. The outer holes are for the e32.

[uk525td]

Oo... always wondered why they were there.... i guess oyu could use them if oyu craved camber :P

[mean green 540]

Use the hole that was used from factory.

I sand blasted and painted it so i cant tell. :(


The front cross member is shared with both the e34 and e32. The outer holes are for the e32.

ooooooooohhhhhhhhhhh makes sense. inner holes will be used :D


Oo... always wondered why they were there.... i guess oyu could use them if oyu craved camber :P

tryed the outer holes it doesnt work, it puts the front tire to far back in the wheel well, there isnt a second set of holes for the rear arms. :( it would be a quik camber set up though. lol