T-netics GT60 (pics)

[diegom6]

Hey guys,

does someone has major info about this turbo, like inducer and exducer for compressor and turbien if possible. Can't open it , so dont' know the wheel values.

Only info I found is this:

GT60

T-28598 (Sticker int he compressor side from T-netics)

125 lb/min 56 Trim AR 1.47 ( Well I saw it says inside of the turbine hosuing soemthing like .70 )

I like about this turbo:

4" mouth , just like my Holset, no mod or new elbow.

T4 flange ( like my holset ) Twin Scroll

2.5" Compressor outlet (like my current setup)

V-band turbine style.

The inducer of the compressor seems to be in the "small side", although, the turbine exdcuer looks large. This turbo was taken from a 3.4L Supra maxing out it with about 22 PSI or so putting down arround 600 RWHP I think...

I'm set on buying a new turbo and already have a chocie, the Borg Warner 362, but found this one, used with zero play shaft and maybe US$900 could be sold to me, this isn't a ball bearing, but I think it has one ball bearing and one thrust bearing (hybrid).

Thoughts?

http://i259.photobucket.com/albums/hh308/diegom6/BMW/07Jan_0001.jpg

http://i259.photobucket.com/albums/hh308/diegom6/BMW/07Jan_0002.jpg

http://i259.photobucket.com/albums/hh308/diegom6/BMW/07Jan_0003.jpg

[milKt]

Why can't you open it?

[e34m535t]

If it really flows 125lb/min its way too big, and can flow WAY over 600whp(try 1000+whp).

And a 1.47 a/r T4?

[milKt]

Why can't you open it?

Oh,
because its at a store...

ASk them to crack it open.
Tell them theres a genie inside.

[diegom6]

Yeah, it won't happen, looks liek he doesn't have the right socket and 1/2 wrench (wont' fit the socket until you rotate the compressor housing in some spots). I will try to insiste, even bringing my tools if needed.

But still, not sure about it, doens't look that large, those 125 lbs/min seems to me very high...but tha's what I found somewhere.....and sof ar only foudn this.

http://www.powerhouseracing.com/Templates/frmTemplateM7.asp?SubFolderID=51&SearchYN=Y

[rt turbo]

theres now WAY a supra was maxing it out at only 22 psi. this puppy could flow 35psi. and these numbers are suspect as this would need to be a large frame turbo to make them. It seems like it is similar to a gt35r.

[Hova]

125 lbs/min would be nice :)