jsbbmw21
01-05-2010, 12:19 AM
Alright folks im looking for a bunch of stuff for my e36 project car. as usual money is a limiting factor but im very seriously looking for these parts and will buy as many as i can. if my motor sell :fingers: i should have the money for most everything.
my priorities are this- motor built and in, which should be happening within the next week or so. just have to take the motor to the machine shop for some odds and ends and then put it all together. after the motor is in and the drivetrain is hooked up i will probably move on to the chassis stiffening stuff bars and what not. after that it will be getting close to spring so ill pick up all the body stuff and try to have the money together for paint repairs. At some point i have to get the money together for the completion of my stereo and interior. exspect a build thread soon!
okay first the list of must have items
s50 cams- PURCHASED
getrag 250 slave cylinder- purchased
presure plate for the s52 flywheel-(all options considered oe-aftermarket) price must be below 100 for a really nice oem or else i will simply spend the extra 20 and buy a new one. purchased
2 jack pads (rubber ones under car not the metal side insert deals)-
for now thats all i can think of
the would like list
m3 bumper for a 325is
zf trans swap (trans and 6 bolt drive shaft with differential flange or a bolt)- if i can find a good enough deal especially localy im really interested in the swap.
m3 side moldings (flate and wider than the standard ones)-
21 or 24 lbs injectors-purchased
3.5 maf and elbow (very high on my list.)
m3 rear diffuser
smoked side markers corner lights taillights and fogs- likly going to pick up the ebay all in one zkw all light package unless some one can beat 200 for everything
strut bars- looking into making my own, im industrious like that ;)
camber plates- generarly cost to flipping much
sway bars- looking for aftermarket. uuc eibach what ever is nice+local i dont want to pay shipping unless its a smokign deal
m3 x-brace.- really needs to be local due to shipping
rougue short throw with dssr-
for now thats all i can think of lmk what you have :redspot and prices. please be ready with pics. pm or post here with details
atm i am out of cash but that can change at anytime as i not only buy parts but sell them too! So if you buy from me your pretty much gaurented that it goes right back into the community :).
my priorities are this- motor built and in, which should be happening within the next week or so. just have to take the motor to the machine shop for some odds and ends and then put it all together. after the motor is in and the drivetrain is hooked up i will probably move on to the chassis stiffening stuff bars and what not. after that it will be getting close to spring so ill pick up all the body stuff and try to have the money together for paint repairs. At some point i have to get the money together for the completion of my stereo and interior. exspect a build thread soon!
okay first the list of must have items
s50 cams- PURCHASED
getrag 250 slave cylinder- purchased
presure plate for the s52 flywheel-(all options considered oe-aftermarket) price must be below 100 for a really nice oem or else i will simply spend the extra 20 and buy a new one. purchased
2 jack pads (rubber ones under car not the metal side insert deals)-
for now thats all i can think of
the would like list
m3 bumper for a 325is
zf trans swap (trans and 6 bolt drive shaft with differential flange or a bolt)- if i can find a good enough deal especially localy im really interested in the swap.
m3 side moldings (flate and wider than the standard ones)-
21 or 24 lbs injectors-purchased
3.5 maf and elbow (very high on my list.)
m3 rear diffuser
smoked side markers corner lights taillights and fogs- likly going to pick up the ebay all in one zkw all light package unless some one can beat 200 for everything
strut bars- looking into making my own, im industrious like that ;)
camber plates- generarly cost to flipping much
sway bars- looking for aftermarket. uuc eibach what ever is nice+local i dont want to pay shipping unless its a smokign deal
m3 x-brace.- really needs to be local due to shipping
rougue short throw with dssr-
for now thats all i can think of lmk what you have :redspot and prices. please be ready with pics. pm or post here with details
atm i am out of cash but that can change at anytime as i not only buy parts but sell them too! So if you buy from me your pretty much gaurented that it goes right back into the community :).