PDA

View Full Version : Way through the firewall?



nismoracer65789
10-30-2009, 11:10 PM
Just wondering if there is any rubber grommet or anything to get from the engine bay to let's say the glove box? Or are there any that are near the box that houses the DME? So far the only ones that I have found are the ones from the pedal box to the engine and from the back seats to the trunk.



Thanks for any help!!

Thanks!

ENIGMA4
10-30-2009, 11:17 PM
I have snaked a couple wires through the opening in the glovebox that is the air intake for the DME just make sure you are careful about the fan.... I never had a problem, but it is an air intake so just make sure that everything is clear and you should be good to go.

nismoracer65789
10-30-2009, 11:19 PM
Cool thanks i will give it a go tomorrow. I just wasn't sure were any openings are

Stir Fry A Lot
10-30-2009, 11:23 PM
I have snaked a couple wires through the opening in the glovebox that is the air intake for the DME just make sure you are careful about the fan.... I never had a problem, but it is an air intake so just make sure that everything is clear and you should be good to go.

+1. It actually ends up coming behind the glovebox, no need to open it just feel around the back and you can grab it. Its kind of tricky snaking the wire initially since its an accordianed piece of rubber but it does work.

nismoracer65789
10-30-2009, 11:24 PM
Ooo stir fry.... Just the guy I wanted to talk to.... Were did you mount your tcm for the war chip?

ENIGMA4
10-30-2009, 11:27 PM
yeah i just first used a hanger to get it through there and then attached the wires to the hanger, pulled it through and there you have it

Stir Fry A Lot
10-31-2009, 02:34 AM
I was wondering if thats what you were doing. I mounted it to the blank next to the fog light switch.

http://i30.photobucket.com/albums/c334/skindoobie/IMAG0019.jpg

nismoracer65789
10-31-2009, 09:57 AM
Wow the cord is long enough to reach there?
I may just mount mine there