Does anyone have a Intake Gasket DIY

[Golgade]

Hello,
I have been looking and looking, and I can't really find any information on how to actually change the intake gaskets on an M60. A few dead links, but no good solid info. Does any one have a DIY? I just dont want to go into this thing blind.
Thanks

[skylinergtr]

I did the job maybe 9 months ago. I dont have a DIY however the job is pretty straight forward. One thing to make sure though is if your valley pan is leaking (which probably it will be). Replace it while your down here.

Heres the thread when i did mine. It basically shows whats underneath the intake.

[eaglecomm]

There is a lot more in this one as he was going after the valley pan, but it should get you there and back. It's for a newer model 740, but the engine is pretty identical.

http://www.magnum1.com/BMW-740/740_Pages/Maintenance-Pages/Valley-Pan-740.html

[raceyBMW]

+1 look for Valley pan DIY's...they will have the removal of the IM included.

M62, but still similar
http://members.cox.net/rlacm/IMDisassembly01.htm