Rear E36 M3 Brake Swap?

[Xenocide]

To complete this, do I only need to swap the rear trailing arm over or whats the deal?

Thanks guys!

[thedude60126]

basically you have to swap all the arms aswell as the half shafts/shims. Just did it to my car not to hard just time consuming

[Brent 930]

Plus the emergency brake won't fit but you might get that with the trailing arms.

[mvancE30]

i have a set of m3 controlarms, hubs, axles and calipers for 250obo.

[doogee]

i have a set of m3 controlarms, hubs, axles and calipers for 250obo.

He needs the trailing arms to make the swap.

[Xenocide]

no where in this thread did I ask to buy parts.

go away troll, keep it in the classifieds.

[Blitanicle99]

Is there actually an advantage in the M3 calipers/Trailing arms?

They are still 2 piston rear correct?

[Brent 930]

^Single pistion

[Xenocide]

just more swept area.

[SS Ball3r]

wait, you need to swap the trailing arms, half shafts and other stuff to put on m3 brakes?

[Xenocide]

makes sense, spindles are bigger, didn't think there was a larger half shaft, but not surprised.

[Brent 930]

The half shafts are way bigger.