PDA

View Full Version : jacking point


ljcrick
08-23-2009, 12:45 PM
I have a flat on rear tire on a 2000 321 i 4 dr and I am having trouble locating the jacking point on frame any advice on location or what to look for thanks
Lantz
08-23-2009, 07:57 PM
there should be a black plasticky block on the rear side. there are two on each side, those are jack points.

"Technique:
Pull the handbrake firmly.
Jack up front of the car (under the engine)
Post stands in front (2 lateral)
Jack up the rear (under differential)
Place the next 2 stands at the rear. Done."

http://i19.photobucket.com/albums/b161/klchew/Accessories/bmw_jack_and_jack_pads.gif
Kevlar
08-23-2009, 09:18 PM
Instructions
Lantz
08-24-2009, 09:38 AM
Instructions

where did you find that kevlar? are the owners manuals online?
Kevlar
08-24-2009, 10:03 AM
http://www.bmwusa.com/standard/content/owner/dgh.aspx
Lantz
08-24-2009, 10:32 AM
http://www.bmwusa.com/standard/content/owner/dgh.aspx

great sucess
ECSTuning
08-24-2009, 11:53 AM
The pads look like this:

http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Maintenance/Exterior/?utm_source=bimmerforums&utm_medium=forum&utm_content=postreply&utm_campaign=postreply

We also have our jack pad adapter available to make using them a bit easier.

http://www.ecstuning.com/product_library/14334/800/BMW%20Jack%20Pad%20With%20ECS%20Adapter%20Kit.jpg (http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Maintenance/Exterior/?utm_source=bimmerforums&utm_medium=forum&utm_content=postreply&utm_campaign=postreply)