shadoogi
06-28-2009, 07:42 AM
Hi Guys. e34 540I LE (Same as US 540i Sport)I recently removed the Hydraulic servo and Master Cyl to fix a small leak on the servo.I replaced the servo "O" ring and seal and bench bled the master Cyl. (which was not tampered with as it was working OK.) Fitted all to the car and proceded to flush bleed (Two man Style) starting from R/Rear "Couldnt get a pedal" After about an hr of work almost no bleeding pressure created (and almost no pedal) I moved to the front and got instant bleed and solid line which gave some low pedal. Went back to rears but still cant seem to get a flow.started the motor to see if servo assist would help. pedal went worse'
I would appreciate any help or suggestions in diagnosing possible fault
ond remedy
Cheers Gerry
I would appreciate any help or suggestions in diagnosing possible fault
ond remedy
Cheers Gerry