pdx e34
06-07-2009, 05:49 PM
Hey guys. So I am doing a lot of work this coming Sunday to my M50 motor. Included in this work is a new thermostat and waterpump. What kind of sealant do I need to seal things up? I know how to replace them from searching but i didnt see what sealer to use or if any was necessary at all.
List of things I am doing:
New Radiator (because its cracked and leaking horribly)
New Upper and Lower Radiator Hoses
Water Pump
Thermostat
Oil Change
Coolant Flush and Change. (I was using generic green coolant and have decided to go with the BMW blue when i put the new radiator in).
Alternator V Belt (cracked)
Edit: I just noticed something about white lithium grease. that should be available at any outo parts store right? I live right behind Auto Zone and Knechts
List of things I am doing:
New Radiator (because its cracked and leaking horribly)
New Upper and Lower Radiator Hoses
Water Pump
Thermostat
Oil Change
Coolant Flush and Change. (I was using generic green coolant and have decided to go with the BMW blue when i put the new radiator in).
Alternator V Belt (cracked)
Edit: I just noticed something about white lithium grease. that should be available at any outo parts store right? I live right behind Auto Zone and Knechts