WTB - wiring harness from a E34 530i or E36 M3 or 320i

[clovold]

I need a wiring harness from an automatic transmission car that had a 5HP18 transmission. I don't care if the engine part of the wiring harness is hacked, I only really need the auto trans wiring part of the narness.

Potential donors:

1992-1995 BMW E34 530i M60/B30
1993-1995 BMW E36 320i M50/B20
1993-1996 BMW E36 M3 S50us/B30 (the '96 may have been OBDII so that wouldn't work)

My project is to put the 5HP18 transmission I have from a '98 M3 into a '95 325iC. I already have the shifter, drive shaft, torque converter, cooler + lines. I just need pre-CAN bus wiring for the transmission to tie it all together...

[Rigmaster]

I've got a 530i parts car- I'll be glad to cut the trans harness out if you tell me for sure where you want it cut.

[clovold]

I need the wiring from the ECU to the transmission and shifter. It's integrated into the engine wiring harness, but I don't need any of the part that goes to the sensors or fuel injectors, so you could just cut off the part that goes to the engine to make it easier to remove.