new wheels, HRE 546

[Willy///M3]

sold the MVR's and picked these up,

hre 546 high polish finish

19x8.5 et 38 235/35/19
19x9.5 et 46 245/35/19 with rolled fenders

couldn't beleive there is no rubbing at all

btw, for those interested in purchasing cf fenders, contact David at Dtmotorwerks.com. I think he may have some, if not there is another website I can dig up that may have some also.

http://www.imagestation.com/picture/sraid75/pef274030b74ef78dac13269e66173867/fb54ebcc.jpg

http://www.imagestation.com/picture/sraid75/pc592320ca861c69cbc23cf63f7c16345/fb54ebc6.jpg

http://www.imagestation.com/picture/sraid75/p7f8ce7cf434664576a9740f26d66542c/fb54ebc9.jpg

[E36Eric]

Damn, what a baller. Nice ride man.

This is the baller money shot right here
http://www.imagestation.com/picture/sraid75/p734fa60f1f98e83d5d866ceb2ecb8402/fb57813d.jpg

[Sam L]

:eek: baller. now how bout a matching set on the amg?

very nice very nice.............

[chisau]

Willy:

Your car looks great. I just relo'd to ATL from NY. Where did you get your fenders rolled? I currently live in Sandy Springs and I also drive a Cosmos M3. I was looking at the I forged Aero's which are similar to your wheels, but I never thought that I could squeeze 19 x 8.5/9.5 on there. What susp. are you running?

Mike

[Roffle Waffle]

Now I know what I'm shooting for. How much were the fenders?

[CashmoneyM3]

Those wheels look incredible! I am running a set of HRE 540's in 18's. I wish I had gone 19's now! Good luck.
-Lance

[Stylin]

now those are nice rims! Ive always liked those... especially after i saw them on Lou's car back in the day.

[Willy///M3]

thanks guys

chisau - Welcome to Atlanta. I'm in the Duluth area. The only place I found that rolled fenders is Butler Tire in Marietta; 75 bucks a side. The 19x8.5's were a piece of cake to fit. Im surprised I could fit 9.5's with 245 tires in the rear. Im dropped almost 2 inches in the rear too. I looked at Iforged wheels before. The prices are very attractive but I decided against them after reading numerous stories by dissappointed customers.

Silver - the fenders were 600

stylin - thanks man, how are the MVR's holding up? I'm surprised that my set have held up pretty well.

[Ali]

bling bling, knew you would love them willy. I am now jealous of your $5k wheels :D

[Ali]

oh yeah, to show what a baller willy is, the m3 is his beater car :eek:

[dave is cool]

Those look SICK :buttrock

[Willy///M3]

lol Ali you are one crazy mofo

I tried calling you today but the number didnt work, pm or email me your number

[BKarktic328i]

Butler Tire in Buckhead will do the same...


For the Atlanta folks....check this out...gonna be cool....would love for ya'll to join us!

http://www.bimmerforums.com/forum/showthread.php?s=&threadid=114055

[SI///M3]

That looks awesome. I've always loved those wheels. I will have a set of those for my street rims someday. Beautiful car.

[Khoalty]

Willy is a true baller.:)

[Stylin]

The MVRs are holding up very well acutally.. not a problem. :)

Good luck with the HREs.. theyre absolutely gorgious on ur car!

[LboogieG12]

damn those are nice...great choice. great tuck :)

[///M LIFE©]

Damn your car keeps getting better and better!

[Willy///M3]

mannnnnn , can't sleep

but I appreciate all the positive comments guys.

the hre's looks like a little fetus compared to the mvr's..the mvr's just look so huge while the hre's on the other hand look like 18's to me. i'll post up a pic of both wheels on the ride. im gonna miss the mvr's:bawl

[mixedboi23]

bigger pics! lovin the wheels. they look MUCH better than the MVR's. good job!

[MGregski]

I love those. I envy you. Paid a pretty penny for those huh?

What about the IForged? I'm asking since I was actually looking at those today.

[95MMM]

those wheels are perfect

[///Arman]

dammm those look so good.

[MrBimmer]

alright. wow. okay this is what i'm wondering. lol you just did carbon fiber fenders and hood.. then you get HREs. that puts a whole in your pocket. i barely have enough money to do anything to my car now. i understand tuning a bimmer is hella expensive and this is none of my business but where do you get ALL that money? cuz i know HREs each are like 500$. lol im jus wondering.

very very hott car. lovin it. :)

[MGregski]

More like double that. 1000$ a piece.

[MGregski]

Here
http://www.rdmwheels.com/hre/546.htm

[///M3ryder NY]

Damn Willy. You don't play games! Did you buy those new?

Those have always been the HRE's I thought I would buy if I ever wanted to step up like that. nice!

[Ali]

scratch that, $6k wheels. Damn willy, I just realized how good of a deal I found you!

[blackm3]

Willy, I can't see your exhaust tip..are they darkened???:):)

[Luke]

those are possibly the hottest wheels i have ever seen in my life :eek:

[EUPHORIA]

That's damn beautiful man. I love HRE's. Would love to have them on my E39, but too expensive. How much did they cost you? ~6K ?

[aMiR M3]

My brother (amir) and I just saw this in person and I must say I now want a set, they are beautiful wheels! :buttrock
~Ali

[///MCubed]

Willy,

Make sure you keep an eye on your tire pressures, HRE's are not as strong as some people may think, specially running the setup you have (I have had the same setup for the past year or so). Also, unless you want to be a slave to those wheels in terms of keeping them nice and polished, use Mother's wheel/metal polish on a regular basis. They are nice looking wheels, but they are a pain in the ass to keep them looking that way.

[Willy///M3]

thanks everyone.

I picked up the set used for 3500. I'm kinda split 50/50 on weather I should paint the centers black. What do you guys think?

m3ryder, chris,

I love your acs spoiler.


///mcubed,

thanks for the heads up man. My set came clearcoated but the clearcoat is starting to come off so I'm gonna have the shop strip the cleatcoat and repolish them for me without clearcoat this time. I'll be sure to pick up the Mothers polish you recommended.
Any pics of your car? I'd imagine they look stunning on your Alpine White.

[MGregski]

What do you mean "centers"? I'd leave them alone. Sick wheels:buttrock

Greg

[///MCubed]

Willy,

I am most likely going to have my set shot peened/anodized black soon, I just dont have the time to dedicated to having the wheels looking the way I want when polished (i.e., I don't want to be a polishing slave). If yours are clearcoated, then forget about using Mother's polish, use something like Simple Green to clean them. Here is a pic of my car before the suspension was added.

http://www.dtmpower.net/pictures/miamimeetcmt/m3.jpg

[///M3ryder NY]

Thanks willy! FWIW, i say leave those wheels exactly as they are....both you and MCubed... But hey, thats just my opinion. Those wheels are some of the hottest available for the e36, and I think they look perfect polished!!! Especially on cosmos!!! :D

[mpower310]

Those rims are sweet. The fenders and hood look dope as well. Did you get the hood from dtmautohaus?

[BoostFed325]

nice upgrade there.. i like those much better then the mvr's

[potpie]

wow i love polisehd hre's :thumbsup:

[BoostFed325]

not sure it if was already said but.. where did you get the hood?

[318allshow]

if thats his beater car, what are his regular cars? Damn i just looked at those prices what a baller, are you in the pharmacy business :) Jk

[LboogieG12]

Originally posted by ///M3ryder NY
Thanks willy! FWIW, i say leave those wheels exactly as they are....both you and MCubed... But hey, thats just my opinion. Those wheels are some of the hottest available for the e36, and I think they look perfect polished!!! Especially on cosmos!!! :D

i'll 2nd that!

[Amir]

just saw this now...but wheels look hot Willy ;)