Nuckles
04-24-2009, 09:23 PM
Rebuilt the valve body today, put everything back to the instruction. I did notice some things that were different in the kit than the original valve, one of the spring in housing one was longer that the original, one of my check ball that was in the oringinal valve body was larger(channel body) than the 2 that came in the kit. Well this is the problem fill the car back up with fluid about 7.5 quarts,soon as I drove about 1/2 mile,I notice 2nd gear shifted somewhat hard. Drove another mile or so car was fine, got on the highway after about 3 miles and hit the throttle hard, my rpm went up strangely to about 5000 rpms and it went in TRANS PROGRAM MODE. Shut the car down, message went away, drove away samething, put it in S4 dove okay, then would not shift past 2nd or 3 rd gear not sure that was it. I plan on dropping the valve body again and see what I may have did wrong? I think I may have to add more fluid or repalce the tranmission filter, which I didn't do or add the large ball back into the channel plate and see what happens, plus look at the spring I mention. Need some help with this! I know some of you have some knowledge which this matter !