FS: Full Authentic ACS Kit (ready to move)

[shu328]

--- $$$OLD ---

I'm finally getting around to formally posting a FS add for this kit.

I had purchased this kit from Dan (shrike071) back in September, and literally totaled my 540 a few days later.

Kit is currently boxed up and ready to ship. Vinny (Dark Schnitzer) has been holding the kit for me, since it never officially got shipped to me. And now after wrecking my car, it does me no good to keep an ACS kit in my garage. Besides ... it would constantly remind me of that incident... :(

Please keep in mind, the prepping for the original paintwork was very poorly done, and caused some serious delamination of the top coat paint. The rest of the paint simply needs to be sanded off to facilitate primering.

I am by no means an ACS expert, but I do know for a fact these kits are extremely hard to come by anymore. That being said, I am willing to wait for a serious buyer.

I am asking $1200 OBO. PM me if interested.

Pics here: http://img13.imageshack.us/gal.php?g=p1030022.jpg

Cheers,
-matt

[zubbie]

GL.. nice rare kit. too rich for my pay scale at this point however

[Boogieboy]

GL with sale....that's an awesome kit!:buttrock

Sorry about your car.......if i wasn't trying to get lower right now i would have been tempted to jump on it.

[sachmo12345]

This should be gone quick.

[shu328]

ttt

[BavariaE34]

make replicas of it damn it! lol

[atlfokus]

if you decide to sell piece by piece I want the front

[bmwsone01]

I would love to have this kit, but city streets would destroy these, in a second.

[shu328]

if you decide to sell piece by piece I want the front

unlikely at this point, but if I decide to I will let you know

[e34 life]

uuuuuuuuuuuuuuuuuuugghhhh

[Sam Son]

make replicas of it damn it! lol
reps are easily found on ebay

[BavariaE34]

reps are easily found on ebay

id rather benefit someone on here rather than ebay, and i dont like this bidding funny business...i like to pay one price...

[Sam Son]

:confused uhh

[tammer]

I'm finally getting around to formally posting a FS add for this kit.

I had purchased this kit from Dan (shrike071) back in September, and literally totaled my 540 a few days later.

Kit is currently boxed up and ready to ship. Vinny (Dark Schnitzer) has been holding the kit for me, since it never officially got shipped to me. And now after wrecking my car, it does me no good to keep an ACS kit in my garage. Besides ... it would constantly remind me of that incident... :(

Please keep in mind, the prepping for the original paintwork was very poorly done, and caused some serious delamination of the top coat paint. The rest of the paint simply needs to be sanded off to facilitate primering.

I am by no means an ACS expert, but I do know for a fact these kits are extremely hard to come by anymore. That being said, I am willing to wait for a serious buyer.

I am asking $1200 OBO. PM me if interested.

Pics here: http://img13.imageshack.us/gal.php?g=p1030022.jpg

Cheers,
-matt
Where's the kit located now?

-tammer

[Dark Schnitzer]

Where's the kit located now?

-tammer

Its sitting cartons in Springfield Missouri at my shop awaiting drop shipping to the winning buyer.:devillook

Its going on Greyhound to save money and time for the buyer.....which believe me will be the smart choice....that is unless you live in Springfield !;)

This kit was originally never scuffed and primed before it was sprayed. SO...it simply needs to be peeled off,sanded primed and painted.

On a more perfectionist level.....I'd still have the front piece "guide coated" before final spray.
All AC Schnitzer logo embossing is in great shape and not buried in paint. Thats a big plus...rawt thar !:stickoutt

Also...for those of you thinking your going to be able to source these parts "one by one" affordably.....separate shipping alone will blow that deal long before the individual prices would become obviously high too.:nono

Matts a good guy.........work with him and you won't be sorry.

Cheers,Vinny

[sachmo12345]

Is any additional hardware required for the install?

[Dark Schnitzer]

Is any additional hardware required for the install?


Originally...ACS kits were shipped with a baggie of typical auger type sheet metal screws for the inner fenderwell zones, and a few across the lower front cover.
The rest was held tightly in place with thin tolerance 3M double stick body panel tapes.

This can be easily replicated with stainless screws and 3M tapes today.....which is still better yet...in my book.:)

I actually use 2-part epoxy panel adhesive to mount permanently.:evil2

[5mall5nail5]

Newtown Square huh? I am so close - sell me the front bumper piece????

[shu328]

thanks a lot for stepping in and clearing up questions, Vin.

i know you're a busy guy and the fact that you still stop in to help me sell this is huge.

[Dark Schnitzer]

thanks a lot for stepping in and clearing up questions, Vin.

i know you're a busy guy and the fact that you still stop in to help me sell this is huge.

Not a problem Matt. You should have PM'd me about this thread....I just happened upon it.:confused

Although I'm in Socal for the next few years working/traveling.....I have a co-worker back in Mo. that will take the cartons to Greyhound when called.

This Deal, is good to go now. Although Matt and previously...Shrike, had waited eternally for me to get the front cover correctly repaired and ready.

Cheers,Vinny

[tammer]

Newtown Square huh? I am so close - sell me the front bumper piece????
Heh, exactly why I asked where it is. Not so close to Missouri. Still, tempting ....

-tammer

[shu328]

bumpity bump

[sachmo12345]

Still available? If not Dibs! PM me.

[eightynine535]

reps are easily found on ebay

In which universe?

[DOC540I]

very nice,it would look great on my car! give dibs to schamo...

[Dark Schnitzer]

I need to find out if my boss is driving his STI Subaru or a truck/trailer to Dayton Ohio on the 12th of this month....if its in the truck....he might be able to save you on shipping providing your willing to meet up with him in Springboro ??
Cheers,Vinny.....I'll get to checking...:cool

[sachmo12345]

Thats a crazy coincidence. Let me know.

[Dark Schnitzer]

Thats a crazy coincidence. Let me know.

Will do...I've got a conference call with him in the Monday A.M.

[Sam Son]

In which universe?
there were a bunch of ACS rep front bumpers on ebay for like 150 each about 2 weeks ago...theyre not really my thing so i didnt really pay much mind

[shu328]

Will do...I've got a conference call with him in the Monday A.M.

any good news for us Vin?

[NikosX]

I want fender flares. Where can I get those?

[Dark Schnitzer]

any good news for us Vin?


Its a green-light on this end.:alright

Matt...just let me know so I can arrange contact info for their meeting .:cool

[DOC540I]

Nice... that is crazy how things work out. The kit is actually going on my car and sachmo is just taking care of the deal for me as I am out of the state for work... thanks for working with us...

[4500 RPM]

Whoa that is great news!

[sachmo12345]

Sold! I'll have it on Sunday

[Binjammin]

Nice!

[Dark Schnitzer]

Nice... that is crazy how things work out. The kit is actually going on my car and sachmo is just taking care of the deal for me as I am out of the state for work... thanks for working with us...

Crazy isn't it ?:confused I was surprised myself,lol.:)

Now Sachmo...be sure and forward to me your contact info to pull this off successfully. I'll need to co-ordinate this through my co-workers pretty tightly to make it happen.
Don't delay.....................................:nono:co ol
Cheers,Vinny

[sachmo12345]

Your PM box is full.

[shu328]

--- sold ---

[Dark Schnitzer]

Your PM box is full.

Contact info has been forwarded to the handling/recieving parties.....and should be in Sachmo's SUV or Truck by Sunday 3:00 pm !:buttrock

I love it when things work out for everyone ( Huggs):D

[shu328]

whoever's car this kit ends up on MUST ... I repeat ... MUST post sh*tloads of pictures.

[DOC540I]

will do...

[Boogieboy]

Congrats....and way to help each other out! In the midst of all the other crap going on in the forums it's nice to see them being used for what it was intended.:buttrock

[Dark Schnitzer]

will do...

Well, from what my co-worker told me....Sascha received the kit at the rendezvous spot.:)

Has Doc recieved it from him...I guess is the next question there in Ohio??:confused

DOC...PM me with any prep questions you or your Body-shop guy might have about this kit.I'll aid you where I can.

Cheers,Vinny