FS: staggered M parallels $400

[etasport87]

I've got a set of staggered M parallels for sale in e39 fitment, may work with e38 but might need hubcentric rings. Fronts are 18x8 rear 18x9.5" (size in picture caption typo). These are factory replicas but are in good shape all wheels are straight, some clear coat chipping on lips but thats about it. Good for snows, or upgrade from those 16s. Looking for local sale, they are ready to go. 1 front still has tire mounted.

Pictures, http://www.valleyautowerkes.net/Parts_for_Sale.html#grid

[Cyrix2k]

trade for mildly damaged 17" style 19s with good tires?

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-1.jpg

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-4.jpg

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-3.jpg

^that's the extent of the damage. They hold air and I drove on them for a while... that last one may be fine for all I know, but it looks like a crack. I haven't had the tire off to see if it's been repaired. :edit: In the picture of 4, the top left is my spare which is curbed to hell. I'd include the other good style 19 or could actually include the whole set of 5. I just need a spare.

[etasport87]

Sorry, no trades. These have been off the car for awhile and are just sitting in the garage.

[BMWBurnout875]

I may be interested in those idk if your looking to sell or trade or something....let me know. email is mattdotson@tmail.com if you prefer to do it that way.


trade for mildly damaged 17" style 19s with good tires?

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-1.jpg

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-4.jpg

http://img.photobucket.com/albums/v319/Cyrix_2k/rims-3.jpg

^that's the extent of the damage. They hold air and I drove on them for a while... that last one may be fine for all I know, but it looks like a crack. I haven't had the tire off to see if it's been repaired. :edit: In the picture of 4, the top left is my spare which is curbed to hell. I'd include the other good style 19 or could actually include the whole set of 5. I just need a spare.

[etasport87]

bump any takers?

[BoardEm]

I'd be interested but I'm in VA

[etasport87]

Where abouts in VA, I would be willing to drive a little if you wanted to meet up.

[BoardEm]

Southeast. Can you send me some pictures if each wheel? I'd be willing to meet you somewhere also. Thanks.

[etasport87]

I will have pictures of all wheels taken this weekend for you.

[BoardEm]

Alright, thanks.

[missinglink]

I am in Annandale VA, not sue if you'd be willing to make the trek.

[etasport87]

Here are all 4 wheels. Annandale isn't that bad of a drive for me.

http://www.r3vlimited.com/gallery/files/7/5/9/8/dsc04963.jpg

http://www.r3vlimited.com/gallery/files/7/5/9/8/dsc04964.jpg

http://www.r3vlimited.com/gallery/files/7/5/9/8/dsc04965.jpg

http://www.r3vlimited.com/gallery/files/7/5/9/8/dsc04966.jpg

http://www.r3vlimited.com/gallery/files/7/5/9/8/dsc04968.jpg

flash really shows the clear coat chipping. Thats all it is, no real curb rash, just the clear chipping.

[Blau Streak]

What is the offset on the parallel knockoffs?
Any insight on fitment for a e36 M?

[etasport87]

I'm actually not sure what the offset, and I think the likelyhood of them fitting on e36 m3 is pretty low, but who knows with the right tires... I'll have to check when I make it back home.

[Mscire2]

If you can figure out the offsets i may be interested

[Mscire2]

any word on what the offset is

[etasport87]

Oh crap I forgot to find that for you.. I am going home tomorrow and I'll try to remember to check it out. Are you going to be at Summit on Saturday? I saw your car posted in the thread, badass, i need that stance for my e36

[Mscire2]

Yup ill be out there bright and early, gotta setup timing equipment and get all that running.

[etasport87]

Looks like et14 front and et26 rear. btw, nice drifting on the backfield of the circuit today, almost pulled it out on the third run.