E36 M3 splitters [Any condition]

[Bluebimma]

Looking for a set of splitters that fit the E36 M3 bumper cover. They do not have to be perfect by any means. New, used, cracked, or broken (but with all pieces) will work for my project. Looking for both sides and cheap. PM me only with pics, price, and decription of condition.

Thanks

[SQ Bimmer]

Absolutely not interested in just one side? One of my parts cars came with a single cracked CF covered splitter.

[Bluebimma]

How much? Trying to keep the cost low just in case i mess it up when i "put" it on my bumper cover.

[SQ Bimmer]

Let me make sure I still have it, may have tossed it already. I would be willing to sell it to you for the cost of my time to ship it plus the shipping costs. Will get back to you. :)

[Bluebimma]

Cool, ill be around. Wish i couldve snagged that m3 setup from you. Since then, ive lost the apartment, job, and a lot of other things. :( Slowly building my way back up, while living with my parents. :x

[tiMASTER]

Do you mean the right and left filler pieces that go between the standard one-piece standard M3 splitter and the LTW/GT adjustable splitter?

If so I have a new pair in the box.

BUT, these are my only spare set!

Hopefully someone else can come up with a set for you.

I can give you part numbers if yu want them...

[Bluebimma]

http://i123.photobucket.com/albums/o305/bluebimma/Brake%20Setup/E36-GTsplitter2.jpg

These are what i need. Ebay has them for pretty cheap, hell, shipping is more expensive. DDMTuning also has them for 55 bucks, but im not willing to pay so much for something that may end up in the trash if the final outcome isnt what i want.

[Bloodrunsdry]

Stupid ebay. i was looking at that and then saw that the shipping was the same price. 5th DOWN!

[tiMASTER]

Yes. The black full-length piece is the standard M3 part, and the left and right lower pieces are the filler pieces.

The factory ones share the same mounting holes as the normal M3 splitter, so it is an easy install if you wanted to add these to an M3 with the factory splitter in place already.

Here's a pic of my car with the entire adjustable splitter set up installed:

http://www.318ti.org/gallery/data/500/medium/16_wide.jpg

(sorry about the distortion- I was getting creative...

And this one, less distorted:
http://www.318ti.org/gallery/data/500/medium/red_Mti_4_cropped.jpg

The lower splitter slides in and out, and it has three strops to position it for as much or as little down force as you might want in the front.

I am quite happy with it, and it's a factory part!