24lb injectors for N/A m30 build

[Mr535]

Looking for some cheap 24LB injectors to try out in my m30 I just put together. Also does anyone know where to find the adapter for the old bosch style fuel pressure regulator?? Thanks!

[5271990]

For what its worth the stock FPR is 3 bar, the FPR from a porsche 944 is 3.5 bar and is a direct replacement

I believe it was stock on the 944-S 2.5L 16v DOHC

[clevertd]

details on the build?

[Mr535]

The build is 11:1 pistons,bored .50mm, 282 Shrick cam,new shrick dual valve springs,titanium retainers,3 angle valve job,1st oversize bigger valves, ported and polished, ported the guts out of the intake, headers,high flow oil pump, JB lightweight flywheel, stage 3 Spec clutch, Map ecu 2 piggy back with map sensor, and still looking for injectors adjustable FPR, bigger bore throttle body and 3:91 LSD.

[PCP JR]

Someone's bound to say it, so:

Pics.

And someone's bound to dig up the worthless smilie...so:

http://www.charlieparsons.com/images/ThisThreadIsWorthless2.gif

[Stir Fry A Lot]

Schneller sells the injectors. Many of us have bought from him and have had no negative experiences. He cleans them so well that you'd swear they were brand new but I had mine rebuilt and flow matched just for good measure.

[5271990]

Nice, does it burn oil excessively??

Hari had this built, check his other threads if you are curious.
http://forums.bimmerforums.com/forum/showthread.php?t=732622&highlight=3.6

owners of the high compression Alpina B10 (N/A not the turbo one) found it burnt oil aswell.

What are your plans for the car?

Are you upgrading the rocker arms and upping the rev limit??

[SchnellerE34]

I have the 22lb Bosch Design III injectors. At stock BMW fuel pressure they flow 24.5lb's. They are $59.00 for a set of 6 with free shipping. PayPal is: steedaq86@hotmail.com

[Mr535]

Hey guys thanks alot for the help and I will post pics up as soon as I have enough posts to do so. As for the rocker arms I"m planning on that as soon as I can find some. I went into this build not knowing what to expect and I havent fired it up yet because I still need injectors. As for my plans I just wanted to add some balls to my daily driver I will go for a couple runs o the track as soon as its broken in.

[5271990]

*cough* http://www.millerperformancecars.com/catalogue.html?page=shop.product_details&flypage=flypage.tpl&product_id=26&category_id=8

They also sell a MAF and can do custom tuning for you, based in VA, Canada.

-------------------------------------------------------------------
I don't want to piss on your bonfire but you kinda picked a bad platform for a naturally aspirated build, the cost to power ratio is quite horrible for the M30 once you get past the initial tuning which was uber conservative from the factory.

[thespeedfactory]

I have a splitscond 4 " MAF/ FTC piggyback available (laptop tunable)

Also a FSE powerboost adjustable FPR with m30 fuel rail adapter.

PM me if interested

[Mr535]

It's a toss up between vacmotorsports or miller for the rockers. Anyone try them?