PDA

View Full Version : Wonderful Winter e36 s52 turbo kit



iMtrstng
12-02-2008, 11:41 PM
UPDATE: Let me know who would be interested in what parts and I may consider parting out depending on how much interest I get.


AA stage 2+ Intercooler

AA Manifold modified + AutoMeter Exhaust Gas Temperature Temp EGT Sensor Kit
- less than 700 miles on the manifold.

T3/4 SPA Stage II Turbo
- Hi-Fi Stage 5 Wheel, 4" Inlet, 2.5" Outlet, .70 Intake Side, .63 Exhaust Side
- 60-1 Turbo (equivalent to the size of a GT35R)
- 700 Miles on the Turbo, no shaft play (previous owner opted for a huge turbo)
- Tapered 90 Degree Elbow Welded on to prevent annoying coupling blow-off's at Boost
- Capable of 500+whp

Brand New 993 HFM
Brand New TRM Engine Mount. NOT IN THE PIC
GREDDY PROFEC B SPEC II 2 ELECTRONIC BOOST CONTROLLER.
12 x T-Bolt Stainless Steel Clamps
8 x Silicone Couplers
Spal Fan
Tial 44mm Wg
Oil feed line
Porsche BPV
3'' Piping for the Intercooler
42lb Injectors
.140mls hg for s52
oil drain kit for turbo
new exhaust manifold gasket
Hks ssq bov

Also included but not pictured
new arp head studs from mike r.
walbro fuel pump
aa chip tuned for gt35r,42#, 3.5"hfm

I am selling the kit because I realized quickly a diy kit is a bigger investment in time and money than I was looking for. I have not used these parts so they are in the same condition I received them in. Your choices for the tune are to either send it back to aa and have the chip modified to work with the spa turbo or upgrade and use gt35r instead of spa turbo. Basically all you need to get this kit going would be to figure out tuning, hook up a boost guage, and figure out what you want to do for exhaust. I paid 3000 for the kit and added the aa tune, mls head gasket, head studs, fuel pump, oil drain, bov, and various bolts and lines so will start my ASKING PRICE AT 3800. Would make a great christmas project for someone. This kit can be modified for work with any e36 s52 car obd1 or 2. The only difference for obd1 would be to find different tuning. Will ask buyer to split shipping with me.

P.S. The UUC clutch in the picture is not included because I am still planning on using it.

http://i285.photobucket.com/albums/ll59/wdv3835/DSC01717.jpg?t=1228279252

jszy25
12-03-2008, 12:09 PM
That is an amazing deal. Someone really needs to buy this quick.

iMtrstng
12-03-2008, 04:21 PM
Thanks for the kind words, will also consider offers and partial trades for other parts, I am planning on putting this money back into my car

Xuracing
12-03-2008, 06:37 PM
How much For everything Minus.
993 HFM
AA Chip

also how much power were you expecting to get running with the 42lbers?

edit. Do you know what cp will the .14 mls drop it to? Also This will also fit s50s correct?

iMtrstng
12-03-2008, 07:29 PM
pmed you some numbers and info

jayzx7
12-03-2008, 08:47 PM
is that the right i/c piping or do you have to cut it and make it work? do you have a gt35r and is there any thing else you need just d/p and exhaust

iMtrstng
12-03-2008, 09:34 PM
you will have to do some custom fitting for ic piping but there should be enough to get the job done. I do not have a gt35r but I priced them out anywhere between 900 and 1300 bucks depending on the condition and you should be able to sell the current spa turbo for around 500 bucks. The only things this kit is missing is tuning, boost gauge, exhaust and a few various gaskets and such. For example the ic piping is 3in but the hfm is 3.5in so you will need a 3-3.5in silicone reducer, also need gaskets to go between exhaust mani and turbo and also exhaust mani and wastegate and im sure you will run into a few various things as it is a custom kit so will be different for different cars

humpty bumpty

nitrosobmw
12-06-2008, 01:36 AM
how much for the AA chip.

iMtrstng
12-06-2008, 12:26 PM
nitro-pmed you. Also wanted to let everyone know I would be interested if anyone wants to trade a s/c kit for this turbo kit.

jayzx7
12-06-2008, 04:22 PM
is the tune you have for obd1 or obd2? check out my sig for s/c info. i have 2 setups for it. pm me for more info

iMtrstng
12-06-2008, 09:59 PM
jayz you have a pm

iMtrstng
12-09-2008, 12:51 PM
good day

iMtrstng
12-11-2008, 09:32 AM
bump

iMtrstng
12-12-2008, 11:36 PM
^ How much interest would I have if I was going to part out. Ive had a couple of questions about selling the boost controller and tune separate. Leave a couple of posts if you guys would be interested and ill put up individual pics of the parts and prices

raoke
12-13-2008, 01:36 AM
That is a great price! Pretty much a steal!

If you dont mind me posting I have a clutch that would work great with this kit if anyone pm'd you about including yours.

BadBoostedBmwM3
12-13-2008, 05:52 PM
PM sent!

iMtrstng
12-13-2008, 10:36 PM
PM replied.

BadBoostedBmwM3
12-14-2008, 01:34 AM
PM replied.

Thanks

Karl S
12-15-2008, 10:14 AM
Free bump for a good deal

bigmansM
12-16-2008, 03:41 AM
Willing to sell the hfm alone?

foundingfathers
12-16-2008, 11:12 AM
id be interested in some of the parts including the engine mount....u shuld put some prices on what you want to get for each part thatll spark everyones interest alot more....good luck bump

iMtrstng
12-16-2008, 12:21 PM
Thanks for the bumps guys, I am still holding out for a buyer for the whole kit at this point. Im not sure im ready to have to ship all of this stuff separately and risk having odds and ends laying around no one wants. If I dont have anyone interested in the kit I will post prices for parts in a few days.

talal
12-16-2008, 02:09 PM
If you want to part it out let me know

iMtrstng
12-17-2008, 06:23 PM
Bump trade pending...

If the trade works out I will still have the AA tune for sale.

Will update soon

iMtrstng
12-19-2008, 03:24 PM
Alright trade fell through so I will be posting pics and prices for a part out when I get back from holiday. If you are interested in any of these parts keep your eyes out for a new thread around new years.

venomnightrider
04-07-2009, 02:23 AM
Do you still have the kit avalible if so email at hit2man1@yahoo.com

mpressive4dr
04-13-2009, 06:25 AM
would you be willing to sell just the manifold? if so how much?

farzad97m3
04-13-2009, 01:18 PM
I believe everything has been sold!