PDA

View Full Version : 42lb/Hr DeatschWerks Injectors - Brand new - $200 Shipped


SiGmA
10-27-2008, 04:47 PM
Hey guys,

I have a set of brand new DeatschWerks flow matched 42lbhr injectors for sale, $200 shipped. I will post the flow sheet and pics tonight. LMK!

Roman
SiGmA
10-27-2008, 09:37 PM
Flow chart:
http://img368.imageshack.us/img368/7038/deatschwerksflowcharttj1.jpg

Pics will be up soon, my camera is charging...
hcetretsam
10-28-2008, 05:44 PM
how much power will these support?
SiGmA
10-30-2008, 07:17 PM
42#... 6 cylinders... Roughly 350hp. A bit more really, but 350 is a very safe number.
hotshu
10-30-2008, 07:27 PM
Looking at the flow chart above, on an E36 the fuel pressure is normally 3.5 bar. So the hp sytem limits numbers would actually be higher than those shown for 2.96 bar?

Those hp number & 350hp you mention is at the wheels to the ground, not flywheel hp?
SiGmA
10-30-2008, 07:48 PM
*Techanically* it would be 350hp at the crank, BUT that isn't quite right. Using my Ford injectors (What my tuner wanted me to use), I make 325hp at the wheels, and I have plenty of headroom - This was just my base tune. I *believe* you can get 400whp out of the injectors, but do your own research please!!
NAZ1998BMWM3
11-02-2008, 02:27 PM
Looks like a good deal tome.
hotshu
11-03-2008, 03:20 PM
What's the difference betrween these & Ford green top 42lbers?
SiGmA
11-03-2008, 03:28 PM
Different company, has a different spray pattern, from what I understand.
SiGmA
11-05-2008, 10:20 PM
Bump
325isBoosted
11-14-2008, 05:01 PM
Can i ask why you chose the fords over these, I know the tuner recommended it but maybe someone else could help me understand what makes these more difficult to tune with compared to the ford injectors? Im very interested and can pick them up asap once the tuning concerns are addressed.
SiGmA
11-14-2008, 08:53 PM
Because they have different spray patterns, and my tuner wanted me to use different injectors. Who is tuning you?
325isBoosted
11-15-2008, 06:34 PM
My friend, using megasquirt, im going to talk to him tonight and if he says he can do it ill paypal you the money tom
rcrosby365
11-15-2008, 11:39 PM
These will fit a 98 M3 with a stg @ RMS system correct?
SiGmA
11-17-2008, 01:17 AM
I would assume so. I have no idea if the RMS system uses 42# injectors or not, but if so, then you should be good to go..
SiGmA
11-18-2008, 05:43 PM
No interest?
SiGmA
11-21-2008, 10:46 PM
Bump
SiGmA
11-23-2008, 05:12 PM
Sold, thanks guys.