PDA

View Full Version : alignment out



Michael Avedis
09-19-2008, 12:25 PM
bought a 98 m3 a few weeks ago and replaced all from suspenion wear items
except for the bilsteins. installed UUC camber plates.
best alignment I could get ( closest to stock ) is -1.25 on left and -2.00 on right. So currently they are both set for -2.00

for the winter I would like to get closer to a stock setting any suggestions on what could be causing this variation.

struts spindle shock tower
thanks

Eric98Sedan
09-19-2008, 01:18 PM
Both of my cars are off about the same amount and there's really nothing you can do about it, more than what you've done already.

That is, unless you've got a bent spindle or control arm. Most likely, it's your towers.