help!!!!!

[ryanc528]

ok so i just got my depos for my 00 non xenon 528i and im trying to install can someone please explain i got how the bulbs go in but what about the high beam? is it just a regular H7 bulb too? and what about the back the three wires that stick out the back i got two of them but the third? the one with the small blue connector and yea. and what about the harness? what do i do with that? please help pictures would be great. thanks

[TopasBlau46]

Take your highbeam bulbs from your other headlight unit, and place them into the bulb sockets of your neam highbeam bulb sockets.

Your projectors should already have their low beam bulbs installed (mine did at least).

as for the wiring, it's the exact same as it was for the stock setup, except the ballast goes inbetween the electrical line from the car and into the headlight unit, so you have one more electrical item inbetween the wiring

[Amir@AvusAutosport]

if you're still having trouble post this in the lighting section and someone is bound to help you

[ryanc528]

if i got through my corners what wire is the power wire for those? or how hard is it to run the harness to the ecu? pictures? anything will help..