just one question about 15% pulley

[thenextstig]

if i buy a 15% pulley will i need to replace the injectors and if i do which ones should i get

[catseye]

if i buy a 15% pulley will i need to replace the injectors and if i do which ones should i get
I didn't. no problems.

[thenextstig]

o ok thank you because on some websites it says u really should cause the pulley takes them beyond there 100% duty cycle

[thenextstig]

also did u replace the original belt?

[catseye]

also did u replace the original belt?
definately!

[tenfifteen]

FWIW, I didn't do the injectors or the belt as I can recall, and put about 20k on the car post-mods (it had ~30k on it when I did the pulley).

[ScottinBend]

Definitely replace the belt. Go for the 535 NAPA belt. Would also suggest a belt tensioner stop of some kind. Like this one at Detroittuned.com

No need for the injectors as they are no where near duty cycle with only the pulley upgrade. Will need new injectors if you decide to get a custom tune that also raises the rpm limit .

[catseye]

+1 on the tensioner stop!!!

[thenextstig]

thanx guys you are the best:buttrock

[MINIGURU]

Here is a pulley kit that includes everything you need: http://www.waymotorworks.com/product.php?productid=16259&cat=0&page=2

It has the belt, tensioner stop and plugs with the pulley

[beaner06]

what way says is good! believe and enjoy. i have met way once and have no dog in this hunt.
greg

[ScottinBend]

WTG !

Nice package.....