View Full Version : Diagnostic Software
- Need help with EDIABAS ToolSet32 or other software to clear an error in ZKE
- INPA E66 Restting Transmission Adaptation?
- At wits' end trying to connect DIS/INPA via OBD VAG-COM KKL
- E53 DIS can't connect to diag head (MAC)
- New to Diagnostic Software
- INPA is bilingual?
- NSC expert tyre light rdc
- Can anyone help deciper these fault codes
- Satellite View on CIC coding HOW TO?
- Newby NCS - E61 - Lighting Module issues and Idrive service figures static
- Adding Headlight Cleaning system to VO
- Peake code interpretation-1A
- Original SA code
- San Jose area, I need an INPA/DIS mentor, can trade shop/lift time
- 2003 760Li N73, error 2846: cdkasnke ansteuerung ansaugklappe
- How to Check for LCM & Ignition Switch Fault Codes with INPA ?
- How to reset X3 to factory settings?
- E38-1997 DIS error code 200.19
- 2003, 325i instrument cluster replacement
- SSS/Progman compatibility
- O2 sensors values in INPA - E46
- DIS Data transmission disturbed with engine running
- INPA 4.4.7 @ error sys-0002 ECU
- 2000 540i (6spd Manual) - LCM, IKE, and EWS Factory .bin Files Needed Please
- Think I bricked my DME
- EDIABAS ToolSet32 Error while trying to register new battery.
- DMTL engine code 1449
- DIS installation problem
- Dealer says can not program my car due to aftermarket radio?!
- 1993 E36 318iS w/20 pin Diag Port OBD problem
- EWS - DME Sync. E36 MS41
- Finally I got connection with some modules, however I cant accsess DME or immobilizer
- How to tell if a interface support real ADS?
- Simple Progman help needed with 12.4 volt issue & interface config.
- Tool32 DME Fault code list MSD80.prg
- Code EDC error
- INPA 5.02 Install Error:"unable to create the directory"
- Need help decoding INPA codes
- DIS v57 with v44 coding
- OBD II Link Error!
- WINKFP help
- DIS v57 Needed
- New BMW Standard Tools ?
- BMW ST 2.12 Experience? Anybody got NCSE profile?
- DIS/GT1 on a Dell touch screen tablet PC
- Scanner for E60
- DEPO LED tail lights/ Light Control Module LKM
- SSS Progman v32 base?
- Working DIS/GT1 Download?
- INPA/EDIABAS Slow and unreliable connection to DMEs, E38 / 750
- E46 Euro DME Update..
- Battery Registration (Seeking Best Method)
- Shark injector!!
- What/ where to get best deal, best setup.
- 740i 1997 Crank but don't start
- Problem my DIS
- Remote Engine Start - E93
- 32 pin to 28 pin adapter question
- Maryland code readers! Need help.
- HITAG-2 Hitag2 Key Programmer Tool
- Can DME/CAS be read with engine off?
- BMW DIS Tester
- Looking for the pinout for a 98 740il w/284 DME
- "Engine service soon" light came on
- MaikelK's Progman Installation Guide Problem
- Re-sync sync EWS w/ INPA DIS SSS
- Im pretty sure my DME is bricked... What are my options?
- INPA help
- BMW/Audi/MINI specific collision center in need of software/scan tool
- INPA errors in German
- Transfail safe prog
- NCSEXPER / NCS Dummy (Latest Versions?)
- Wanted: Nottingham, England: 95' E36 - Read of ABS &Airbag reset
- Missing DIS.LHZ files?
- North Jersey IT Guy Needed
- 2010 BMW 550i need soft link
- Tiny ADS Interface - another open source ADS interface
- NCSEXPER & Tool32 (Updating questions)
- Windows 8
- INPA/DIS ECU Communications Issues
- Decode PDC
- Laptop setup.
- Beating a dead Carsoft horse
- AK90+ key programmer?
- Fault code Chinese GT1
- 1998 740iL air bag light on
- Can anybody help me install INPA, DIS and TIS
- Best car diagnostic software for the novice diyer?
- Ignition detect on '08 E60
- Im loooking for some help
- Best laptop to buy?
- Quick INPA how to question
- Registering New Battery with Tool32
- SSS progman/DIS cant identify my car
- DIS Native install will not recognize head.
- INPA, DIS and stuff like that
- IFHSrv32 Netserver function
- HD Video Tutorial on installing INPA ..............
- ECU Communication Errors
- Increase/Decrease Heated Seat temperature values
- LCM help
- Help with MPPS and (Winols?)
- Car software update with ISIS prevents using which programs?
- Inpa
- E93 coding LCI headlights to non LCI car
- Readiness codes and EU2
- Coding questions
- Lost in abbreviation
- Reliable (source for) D-CAN to USB interface cable?
- Need to set max alternator voltage..........
- How to turn CAN Bus ON????
- Benefits to an E34 owner
- Anybody in Jax, FL?
- 2001 320d carsoft 6.5 no results
- E39 - 11/99 - help
- Need help coding
- DISv57 issue 200.16
- Need help E36 - How to change VIN and ISN in used DME?
- Atlanta coder needed.
- Printer DIS
- INPA works for my E39 & E36 but not my Z3?
- EWS Alignment assistance on E38 after DME Exchange
- Instructions for NCS Expert
- Tool32 and SGM writing the VIN
- INPA Problems.
- Older sp-daten files
- No voltage is applied at terminal 15 or battery voltage is less than 9 volt
- NCS Expert
- [320D E46] Flowmeter DDE programming... dangerous ?
- E39 528i 1997 dont start after coding
- DIS help for a very frustrated man.
- E38 740i EWS 3 Delete For V8 E30 Build
- Loosing the will...e90/91 325 cabrio 2007
- OLD TECH FOR OLD BMW's
- E60 pre-LCI cluster swap
- Data Transmission to Interface Disturbed
- E39 start problem
- SSS Progman enabling Mini cruise control help please
- Need Help Coding my E39 :/ (Steering angle sensor)
- E39 Can only talk to DME & EGS with INPA/DIS
- NO auto vehicle detection with ADS, with DO-IT-AUTO adapter
- NCS-Reading VO(FA) and INPA-Engine(DME) read error
- BMW TIS and Windows 8
- New Laptop w/ Windows 8, anything compatible?
- HELP updating DIS V43
- Two Verrions of EDIABAS In One Computer Possible?
- E90 Passanger seat occupancy sensor
- Source to buy a High quality diagnostic computer?
- Issues with active steering which software do I need for an E60?
- DIS v52 and INPA interface (cable)
- Coding Virgin need help
- BMW Software on TinyXP Install ?
- Possible to disable the E46 convenience window opening feature?
- WinKFP Programming Error
- NCS installation with INPA
- Can Icom support my BMW R1200R motorcycle part??
- I think my shark injector bricked my dme
- Customize INPA Engine Script Selection
- 1987 BMW 325i Convertable Diagnostics
- Can Error Codes Ever Reset Themselves?
- NCS: Initial VO(FA) Read Issue
- How to make clone transponder key.
- EWS sync without installing EDIABAS/INPA/DIS using a $10 vagcom cable
- PA Soft 1.3.6 trouble
- E38 Diagnostic software ?
- Cable CarSoft help.
- NCS: (Why) Can’t (I) Delete VO Option in ‘Enter FA’ ?
- Good tool to align MS41.1 at home?
- Nav computer MkIII swap help with recoding
- Pleas help with coding used ECU engine
- Need E-SYS EST Token
- Problem with Oil-reset km on my E46
- EKM troubles
- Help 335is
- Best software for a 87 325i?
- Help with error message.
- Help finding cable for DIS Software
- Ostrich 2.0/tunerpro with maf?
- Kwp2000+
- DIS and clearing ABS codes
- Accidentally erased adaptation INPA ms41.1
- Recoding Cluster after IKE swap (M35080 chip)
- BMW DIS v57 French Vmware
- E61 LCI 2008: LMA (LM2), Coming home and fog lights instead of Xenon possible?
- Replaced Engine, Changing Mileage on cluster help please
- Can you use a cable with DIS native install?
- WINKFP Error 701 Error on determining HW compaitble numbers
- How to recode a used airbag module with PASoft 1.4?
- INPA problems
- I found codes now what?
- ‘Decode IPO’ & ‘ESG XBD SGBD Developer’(?)
- Help with my E39 M5
- DIS and diag. head?
- How Do You Alignment a USED DME with your EWS and Key?
- Best OBD Software for Windows?
- How to make ECU BENCH for E46 DMES ?
- Need proper interface to troubleshoot ABS/ASC on '99 328is
- DIS gives "generic" codes on early E39's?
- 2000 E46 DME trouble
- Disconected airbag without unplugged battery
- Can an E46 owner with INPA please try something for me?
- Where is it??
- EWS interface error, changing code incorrect, key not working 2005 E46 M3
- Need some Help setting up Trigger and ignition for S52 M3 motor
- How to make DME a virgin
- DTA to extern CAN screen
- Looking for working INPA script file for M60B40
- BMW Explorer software
- SSS Question
- Check Engine Light with Occassional Overheating with AC On
- E39 Touring lowering/diagnostics (Software questions)
- DME Self-test error? E36
- Need help understanding my PEAKE tool codes.
- I need help
- A little late to ask but I'm assuming this will do what I want it to?
- Random IP addresses 192.168.0.4 to diagnostic head and won't connect under DIS v57
- Where is my GM5 module?
- Window up with remote
- BMW Scanner IKE not found. EWS only underhood
- Kiwi 2 wifi- is this the best odb port reader for a E39 530i?
- BMW scanner results ...
- BMW SSS/ Progman trouble
- Z3 airbag issues
- NCS Expert 4.0.1
- Help! Get problems after coding KOBMI module
- New version of software in old Bimmers
- Would love some input on this Diagnosis Cables and Soft I bought.
- E39 LED tails retrofit
- Any way to find out the Dealer ID of GT1?
- Help Help - Error codes - diagnosis required
- Orange Gear/Sprocket + Exclamation Warning Light
- Issues after SSS/Progman crash during programing
- E36 SRS Module, recode or replace, need help!
- No power at pin 16 (B+) OBD2 plug
- NCS Expert
- M-ASK software upgrade / coding for MP3 capability
- ABS/ASC Hydraulic bleeding Mode in DIS ???
- No value (FA) in CAS
- Software update
- Does BWM Scanner 1.4 work with X3 2013
- BMW E39 PC-Based Diagnostic Scan Tool
- Re-coding of BMW E38 LCM
- 1997 BMW 328iS transmission problem
- RLS retrofit 96 E38 cannot find regensensor to activate
- Noob questions
- Automatic instrument test when ignition is on?
- Tamper dot help. already got the tools.
- CPS code being thrown, new CPS new etc
- INPA Command Line Shortcuts or Similar?
- Thinking about buying an INPA setup...
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.