View Full Version : Forced Induction
- Supercharging and TurboCharging
- Questions for you Turbo guys
- Seriously considering NITROUS...have some ?'s
- Turbocharger installation almost done
- Anyone ever install an Eaton charger in our cars?
- More boost?
- General question on forced induction...
- Mechtech Owners Help!!!!!!!
- Turbo? SC? for e36 M3
- Turbo Guys, a friend needs links!
- Lowering Compression?
- Larger Intercooler
- This is a new forum about "Forced Induction"!
- I'm looking for potential Moderators for this forum!
- Turbo's -vs.- Supercharger's
- What's your setup? How did you find this place? Check in here!
- Water/achohol injection
- rms or dinan???
- Just got a couple of new pictures
- DIY Powerdyne rebuild... anyone?
- OBD I vs OBD II
- Has anyone done an AA install themselves?
- boost gauge/ oil temp install instructions?
- Question for the AA experts about their turbo set-up?...
- Any supercharged or turbocharged e30's?
- Forced Induction Oil Temp. survey
- My Supercharging Theory
- Dyno charts of the AA M-Coupe.
- More Aquamist Info
- How come SC don't use Intercoolers or equivalent?
- NE1 have an RMS aftercooler in the NE?
- Poll: how many miles be4 Powerdyne went?
- Exhaust Gas Temp. Questions
- Extra DME?
- Well its about time..
- Too Piggyback or NOT too Piggyback that is the ?
- 3.38 Diff in a Turbo M3???
- Aftercoolers, Aquamist, or both?
- oil in intake
- water wetter in aftercooler
- how much did everyone pay?
- piggybacks.
- PowerCommander III: some thoughts (long)
- Centrifugal vs Positive Displacement Supercharger (Question)
- ?'s on 325is turboing
- The time has come.
- M3 clutch
- Anyone have this?
- sale at RMS??
- Ok Guys, Be Honest
- Aquamist onset adjustment?
- Heat Soak
- Adaption/Adaptation and OBDI
- AEM Computer?
- My project
- Dinan clamp
- Head Gasket
- 1997 M3 oil cooler kit
- Data Logger
- EGT Gauge,,,PAUL?
- HeLp!!!
- OBDI Scantool/Datalogging for Forced Induction?
- Scantool Data Logs
- Wideband O2 readings: pre or post cat?
- Anyone here S/C the 318's???
- Supercharger Info....
- Does anyone do ECU programing for OBDII turbos?
- Someone needs to develop and market an aftercooler
- Lysholm Superchargers
- How can FI BMW's compete with this?
- ert supercharger times ???
- you have to hear this..
- neded: TURBOs knowledge
- After cooler pictures? Cut-outs?
- M3 Turbos
- what is the dinan fuel consumption device?
- Strange buzzing sound from the engine bay......
- Turbo or Supercharged M3 -- which is better?
- Maximizing an AA Stage I Turbo
- Extra DME didn't work
- OBD-II to OBD-I swap worth it?
- Big Bore throttle body helpful for FI?
- Boost changes with temp change?
- A Cool and Refreshing Mist for the Bimmer
- E36 Custom Turbo
- mechtech turbo manifold
- useful gauges, where to get them?
- Any probs w/Bosch +4's?
- Compressor RPM
- Water Injection finally !!
- Turbo almost installed!!!!
- Turbo Milage
- Increase pressure in SC
- HELPgauge-where do you get the boost/vac. tap?
- Turbo help please!!
- 2000 540iAT with ESS E39 540 VT 9PSI IC Supercharger Kit
- other water injection setups besides AA?!?
- Catalytic Converter removal and O2 sensor simulators...
- Looks like my m3 needs to head to AA
- supercharger cams?
- Injectors big enough?
- Anyone with an nitrous experience on bmw's
- Unichip?
- Throttle body
- Need help adjusting my boost!
- Should I supercharge a 330ci Steptronic?
- Curiosity Euro 3.2L E-36 Forced induction, What is out there?
- How many miles on your FI car?
- Turbo is running GOOD!
- Aquamist is installed
- rwhp variances with sc and some ?
- Where the turbo addiction was fed...
- update on piping
- Guys with turbo's
- Head Gasket
- i just wanted to say...
- Dinan Vortech SC question
- Supercharger Pulley questions
- Water/Alcohol Injection
- More data logging results
- Ahh need help again!!
- Are my Injectors Okay?
- cheapo blower.
- Zurich SCs (more low end!)
- Benefit of water/oil cooler on SC'd car?
- WHy am i getting O2 sensor errors with my DA kit?????
- Aquamist upgraded by Brad!
- supercharger rwhp on dyno????
- Can you use a CAI if you have a SC?
- RWHP Gain 6 -> 9 psi boost?
- Cold plug recommendations
- NGK R5671A-7 gap spec?
- DINAN: powerdyne vs vortech...
- Forced induction on the track, anyone have experience?
- Piston Question.
- good place to dyno in NJ?
- One more aquamist question...
- Exhaust manifold Qs
- to all those who have RMS kit
- Get those EGT gauges!
- slight hesitation
- Misfire??
- whats the most cost effective
- Which differential?
- Will a RMS aftercooler fit a ESS SC?
- What do you guys think?
- Did anyone buy the Profec B remote?
- Engine cuts out? (need some help)
- Haltech EMS for my turbo m3, what do you guys think?
- best thing to happin since i bought the bimmer
- OBD II scan tool
- Rear Diff for 97 528i
- colder plugs
- Elementary wastegate class
- Bimmerboy...pictures?
- rising rate FPR
- AA STG I $5999 for 325, $8999 for M3...why?
- 1/8 mile times.
- Ngk R5671a-7...
- Anyone with a 95 Dinan blower upgrade to an aftercooler?
- Hey shawn Fogg
- head gasket for 95 M3
- intercooler and aftercooler
- Supercharge a 328is
- 1/4 mile results for first time TC M3
- 42lb injectors
- passed smog!!!
- NEW front mount pictures
- Any experience w/stroker engine?
- M30B34 Turbo engine FS on eBay
- Fuel Filters
- Dinan S/C (w/exhaust/throttlebody), not enough power
- could anyone running a FMIC do something for me..
- New to the board and the addiction...
- RMS Presentation June 15th
- Forced Induction at 100k miles
- S/C a 328is with auto tranny?
- Recommended supercharing resources?
- Nitrous
- Questions for you *blown* NYC TriState Kids
- Just purchased Blower for my M coupe!
- A/F install
- M3 318ti?
- 16g turbo for my 318?
- bov
- BOV on a S/C car?
- SC Help
- Ahh Car is running to rich??
- Boost Controller of Choice in SCC Magazine
- Paul E here are pictures intercooled SC
- New Dinan pulley and belt system for V1 Blower
- Removed fan last week
- turbo a 325i?
- Forced Induction Fuel Help!! {nitrous}
- Alcohol Injection
- 36lb injectors?
- question on bypass valve
- Turbo & Blow By Catch Can
- What power can I expect from adding cams
- Water injection kit alternative to AA and Aquamist
- Aquamist Dash Display
- Mobil SuperSyn 0W40 in Forced Induced Motors
- spark plugs..
- Heat soak question...
- Boost Controllers Article (The PDF Doc)
- Heat Shield for my Water Injection
- General question on cams with f/i
- Which supercharger would you use?
- 328i turbo questions...
- Gauges
- my s/c intercooler piping
- Home Made Water Injection
- Euro M3 superchargers?
- some K&N thoughts
- SC with NOS
- none M's with m3 headers and S/C
- Should I get a different bumper?
- Pic- Custom Nitrous Manifold
- Strut Bar Clearance Measurements Needed for FI Project!!!
- GRP BUY: DA S/C FOR 318s
- Which Supercharger is the best??
- New To Bimmerforums
- Intercooler
- Paging SilverStreak regarding Z3s & S/C
- No O2 sensor
- Experiences with The Dyno Shop in Santee?
- What belt do I use on a 1995 M3 w/ Dinan Supercharger?
- Plasma Injector Coils
- How will it run?
- Average life of a BMW FI'ed car? Any thoughts...
- Custom Turbo for MZ3...
- For those interested in 1/4 mile ET's...
- Have RMS StageII should I swap for OBD1 and Active Stage II Turbo?
- AA water injection, RMS aftercooler for ESS
- Most important Guage?
- Dinan SC removal/refurbish
- Painting intercooler? anyone done it?
- G-Power S/C
- Powedyne S/C pulley and boost
- Propane Injection
- Twin Turbo M3....
- For Those With Dinan S/C ?
- anyone replace their crank case vent valve?
- Dinan S/C along with Euro Ellipsoids?
- hks super afr in a 95 sc/m3?
- Z3 coupe 3.0 charger
- installing supercharger
- Am I fuct because...
- guages
- Opinions on Mosselman Turbo systems
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.