well i got the Oil cooler in today..
very fast turn around i just ordered it on friday.
i was amazed at the extremely HIGH quality of this kit and the free Tshirt
it really made me feel better about the price. the kit installed looks bada$$
the install was not that hard but time consuming took about 3.5 hours, the ss braided line cutting/and placement was the hardest (i had proper tools though) i give it 6.75 out 10 on difficulty def not for the non DIY guy.
Before:
![]()
filter removed (they say to empty oil but i didnt because it new and i didnt want to)
![]()
new filter e46 330 (with adapter peices for oil cooler unit)
![]()
![]()
new filter installed
![]()
new cap and pin
![]()
![]()
cap installed
![]()
![]()
hoses after i premeasured and test fit them/aslo with ends added..
![]()
brackets and hose adapters mounted to oil cooler
![]()
![]()
had to go buy this plug before i could finish its a 1/4 npt about 1.86$
![]()
unit installed
![]()
hose cover to hide the braid line
![]()
finished cap with hoses
![]()
going on a hour long highway trip tomorrow and will actually see then how much its helped...
also it added about 1.75 Qts of oil.
That look sweet Carl!![]()
Looks Great! How much was the kit and where did you get it? I am goin get me one![]()
Very nice Carl. I'm curious to see the new oil temps.
-Joe
blue and red =Originally Posted by ///MDex
and I like it
-Jason
Weekend Car
'99 Boston Green M Roadster - intake, M50 manifold, schrick cams, magnaflow exhaust, TCK D/A Coilovers 500/600, RD front bar, ltw flywheel & clutch, harddog rollbar, schroth harnesses, zionsville radiator, S54 oil cooler, stewart pump, etc ..... ~245rwhp
point taken, give me your oil coolerOriginally Posted by ///MDex
![]()
-Jason
Weekend Car
'99 Boston Green M Roadster - intake, M50 manifold, schrick cams, magnaflow exhaust, TCK D/A Coilovers 500/600, RD front bar, ltw flywheel & clutch, harddog rollbar, schroth harnesses, zionsville radiator, S54 oil cooler, stewart pump, etc ..... ~245rwhp
got the kit from VPD direct. http://www.victoryproductdesign.com/
Dex did you get the Tshirt too?
sweetOriginally Posted by ///MDex
![]()
well if he gets the oil cooler i want the SC
you're gonna have to keep a close eye on me at the dragonOriginally Posted by ///MDex
![]()
-Jason
Weekend Car
'99 Boston Green M Roadster - intake, M50 manifold, schrick cams, magnaflow exhaust, TCK D/A Coilovers 500/600, RD front bar, ltw flywheel & clutch, harddog rollbar, schroth harnesses, zionsville radiator, S54 oil cooler, stewart pump, etc ..... ~245rwhp
You know what's funny. I think that's the same cooler that Turbo Volvo's use. I used to install those on 16v GTI's. Clean install![]()
Looking damn good Carl.
Very nice install and write up. Could you add a post linking this thread in the DIY thread stickied up here?
2021 Phytonic Blue/Cognac BMW X3 ///M40i
1999 Cosmos Black/Dove Grey BMW ///M3 convertible - 5 speed - SOLD
2005 Atlantic Blue Pearl/Taupe Leather Subaru Legacy 2.5 GT Wagon - 5 speed - SOLD
2014 Tenorite Grey/Black Mercedes-Benz GLK 250 - bone stock.
2013 Bianco/Rosso Abarth 500c - 5 speed
2016 Oxford White/Grey Ford Transit 250 Powerstroke 148 MR (DIY RV conversion)
That's pretty hot. How much does it cost?
1991 e30 318is Slicktop - Gone
1996 LS1 Z3 - Gone
99 e46 323i - Gone
2003 e46 xiT - Hers
2014 F-250 CC- Mostly stock
Ah, very clever...Originally Posted by ///MDex
yupOriginally Posted by Hugo
Hmmm...I wonder if S54s can benefit from this, by having two oil coolers (stock & VPD)...Any thoughts?
2008 X5 4.8i
2003 330xi -sold-
2001 X5 4.4i -sold-
2001 M5 -sold-
2001 M Roadster (SCed, Highly modified) -sold-
2000 M Roadster -sold-
1995 325is -sold-
Bookmarks