Yeap I want the kit, but the price is alittle high. Anyone with connection with Eurospeed and can start a GB on this kit, Please start one.
Currently the price listed on Eurospeed site is $950 complete kit. I know if we can start a GB I hope they willing to lower it.
P.S this is for the 2.8l engine
Have you emailed Alex at Eurospeed about doing a GB? I'm sure he's willing to do it.
I'm sure there are plenty of people interested in this kit, considering the results all of us have gotten from it
Dinan 2.5 E30 M3
nice! i'm in!!!!!!!!!!
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
just go find a wrecked 325i
Trevor Ely
'13 JSW TDI
'05 Elise
'96 328is
'91 318is
'90 325is
'89 325is
'88 535is
'95 M-Sport 540i (1 of 200)
'85 190E 2.3-16 ECE
'70 Honda N600
'00 A4 1.8TQMS
Well it not that easy. Yes, you we can find the M50 manifold. But Eurospeed they have the adapter and also the software to extract the maxium HP we can get.. Just think about it we get almost 245HP and 190+ at the wheel.. Hell Yeah.. That M3 power range.
Yes Wan2b.. if you can get the hookup on the price let us know.. I really want that kit. But the current price is just a little too high.
Thanks
wan2b? ouch!!!!
well, what price would folks be happy with? i know that you would like the lowest possible but give me the highest price you can go with.
as i mentioned before, i am close to eurospeed performance and i have done group buys with alex before. let me see what i can do.
eugene
Whatever you can do is fine, just a lower price.
Thanks
Matt
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Guys take it from someone who pieced their kit together just get the kit from Eurospeed. You'll save yourself a lot of headache!
- Roman
Yes please!!! Can you guys get this price down??!
I know the M50 Manifold is like 100-150 at any yunkard, plus some parts here and there another 100. So the price range is around $300 buck w/o the software for a "complete" kit.
But like I stated I rather go with Eurospeed kit since it is a COMPLETE kit and hassle free installation. I was hoping that they would lower the price just a little, if we have more the one buyer at one time (aka GB).
I have email Alex and have yet to hear from him.
So let keep this alive for all of us 2.8l guys.
i actually haven't gotten an email from anyone except eugene.
we actually just did a GB a month or so ago, to which mini bubba and some other guys were a part of.
but if there is interest for another one, here goes the details.
manifold kit + software - $825 shipped, minimum 5 people
how does that sound?
-alex
how about for a e36 m3??
id prob be in....
98 M3/4
Euro six speed/M5 clutch/Uuc lightweight flywheel/Technique Tuning Turbo kit w/ Tec 3r/Snow Stage 2 W/Meth Injection/9 lbs boost
FOR SALE:
Euro E36 Large case Differential with Carrier
Euro Six speed with accessories( Also have six speed with worn 3rd gear synchro)
Euro E36 Halfshafts
I'm in!
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
here goes the details then.
5 people min for this GB.
$825 shipped for m50 manifold and the accompanying software
$200 non-refundable deposit due by 12/12/03 from at least 5 people. kits will hopefully ship before xmas if people don't drag their feet in getting signed up or payment to me, and be received by the buyer shortly after xmas.
this will be for both obd2 e36 328 and m3.
software will be optimized for:
intake
exhaust
m50 manifold
91 or 93 octane
7000rpm redline
155+mph top speed
any other minor software changes can also be done for no charge, ie. 7200 rpm 1st and 2nd gears for the auto-xers. liability waiver will be required for that though.
ecus will have to be shipped to me for programming.
I have a 99 Z3 2.8 this GB would apply to me too, yeah? What if I don't have an exhaust just yet but I do have an intake? Also I live in California so is that going to cause any problems with emmissions and stuff? Thanks everyone!
99 Z3 Coupe 2.8.
Eurosport/Conforti intake... WSM Knob
this kit will also work for z3 2.8 and m roadsters/coupes.
-alex
Count me in!
I called Eurospeed today but I dont know if we have reached 5 yet.
Is this thing still a go?
OH HELL YEAH I AM IN DAWG....
Where do i send the money? Paypal, Credit Card, Check, Peso, Pounds, etc... Let me know
Alex,
I might be interested. Do you have the dyno of the M50 manifold with the AA sw for OBDII M3??
TIA,
Tony
17 Alpine White M2 Performance Edition (1 of 150), 04 Imola M3, 99 Cosmos M3, 97 Dakar M3
Mostly stocks
what if I dont have an exhaust yet? I will be getting one but one for an Mroadster is a pretty dime
yea, that would be good if you have a dyno of an OBDII M3...at least maybe some reviews of it....
thanks
tom-
98 M3/4
Euro six speed/M5 clutch/Uuc lightweight flywheel/Technique Tuning Turbo kit w/ Tec 3r/Snow Stage 2 W/Meth Injection/9 lbs boost
FOR SALE:
Euro E36 Large case Differential with Carrier
Euro Six speed with accessories( Also have six speed with worn 3rd gear synchro)
Euro E36 Halfshafts
Bookmarks