As the thread title states. Curious what's the main benefit, specifically for turbo cars. VAC used to sell what seemed like a quality kit for ~$450-$500 but does no longer have it listed.
2006 CB M3/2/SMG
1998 AW M3/2/GT35R
Relocation or oil cooler ? Not sure I have seen the relocation kits.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
I agree, I also 2nd guessed this but it's a relocation kit and not a cooler.
- - - Updated - - -
Here's a past thread of one for sale, unfortunate no pics.
http://www.bimmerforums.com/forum/sh...relocation-kit
He is asking for an oil filter relocation kit, not oil cooler relocation kit. For reamle like this https://www.summitracing.com/int/sea...elocation-kits
Shogun tricks and tips for the E32 series are HERE!
We don't really have any need to relocate the filter or use a different filter. Seems to be something only a few racers bother doing on these motors.
It might come in handy for designing a new intake manifold with short runners and big plenum....., maybe a front entry.
'97 M3, Estoril blue, 2 dr, euro 6-spd, EFR 9180 divided T4 .92 IWG, RK tuning, CP 8.5:1 pistons, Eagle rods, Schrick cams, L19 11 mm ARP studs, O-ringed block, Supertech stainless/inconel valves, Supertech springs & Ti retainers, ported head, S54 oil pump/pan, 80 lb. injectors, OBD1 intake manifold, Steedspeed twin scroll T4, 3.5" SS exhaust, eBoost2 EBC, HFS-4 W/M injection, AEM Failsafe, Zeitronix data logger, Racelogic TC, OpenOBC w. ethanol %, Ireland Eng. engine mounts, UUC black tranny mounts w. enforcers, UUC twin disc feramic, ARC-8's, MCS 2-ways, Z3 rack, Rallyroad strut bar, X brace, Eibach sway bars, Ground Control LCAB bushings, Bimmerworld RTAB's, Powerflex subframe bushings, 210 4-clutch LSD, Stoptech BBK, titainium shims, steel braided lines, brake cooling ducts.
I have seen them used a lot on M42 cars. Mocal makes a takeoff plate that seems to be popular.
project_bmw_08.jpg
project_bmw_31a.jpg
I don't think it's worth it, we have a superior setup compared to so many cars why mess with it.
1997 328is - Megasquirt PNP, Holset HX35, Deka 80lb injectors, SPA T3, Precision PW39 WG, Synapse Synchronic BOV, DKM Organic Twin Disc Clutch, Innovate LC-2 W/B, Mishimoto Intercooler, Mishimoto Catch Can, Mishimoto Rad, Devils Own Meth, Porsche 911 calipers with E46 M3 rotors, Corsa Exhaust
Bookmarks