Those of you who have used these lines care to comment on length, clearance, construction, and anything else?
https://www.turnermotorsport.com/p-3...grade/?pdk=AwM
I plan to use a 140A alternator with the TMS lines or custom lines if optimal length is longer than 29". I figure 32" is enough, but I'd like see what others have experienced. The lines are PTFE in -10 AN size with 45 degree and straight fittings at the ends. Thanks.
Pm...thanks
No one else has any comments or suggestions?
Ditto conway's comments. I would just call Pegasus and make your own. Super easy to assemble yourself but you can have them do it if you prefer. You'll save several hundred $ over the turner lines.
https://www.pegasusautoracing.com/ad...ID=PLUMHOSEFIT
I just made my own cooler set up with parts from Summit. I will measure the hose next time I am at the shop.
thanks guys! keep the comments coming! Btw, Happy Holidays!
I did look up the custom lines from Pegasus. Pricing was similar for the braided lines (not stainless). Would like some input on the length and if you guys cut the alternator duct up top for a 140a unit.
no comments on length of oil cooler lines?
Sorry, just left the shop... have been super busy lately and keep forgetting to measure them for you. I will try to get it over the weekend
thank you
I cut the alternator duct for clearance. IIRC, I think I started with a 36" section for the first one, then trimmed it a little to fit. Then cut #2 based off of that.
Can u comment on optimal length? Thanks
The track car is in storage - so unfortunately not right now. :-(
Bookmarks