E36 Top Mount 6-1 T3 Turbo Manifold
These are manifolds that we had produced to our specs and design. They are a 6-1 collector to a T3 flange, sch10 stainless with 1/2" flanges. They clear AC lines (need to be bent or custom) and allow a 3" downpipe. These are available for 36, e46, and e30 (m20 and 24v). Check out diypsi.net
List Date: 9/30/2016
For more info, click here to view the original listing: E36 Top Mount 6-1 T3 Turbo Manifold
--------------------------------------
This item is no longer available.
--------------------------------------
These look great! Do you have a picture of it installed on an E36? I was curious if it allows the stock location of the coolant overflow tank?
"Your specs and design" that exact manifold has been around for a while..
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
I like the part where the flanged is visibly warped, and the photo is reversed....
www.classicdaily.net
1970 m42 swapped 2002
1985 LS1/T56 Swapped e28 (557e)
Follow me on Instagram for constant build updates @classicdaily
Bookmarks