I have a 1997 Z3 with a passenger seat that does not go up or down. I have track the problem down to a bad switch. I took the switch out and by passed it directly to positive and the seat works great. I opened the switch up and cleaned up all the contact that were very dirty. The seat now works great with the switch. However, when I tried to put the switch back together I noticed two springs that move the levers back and forth. I don't remember where they go in the switch. I have tried several different approaches to place the springs, however they do not work. Does anyone have a photo of inside one of these switches that show how the two springs are located? Any help would be great. This is the power swith that is all operated by one knob. Thanks