FS: 17 Keskin KT1 Klassik

[Bane2000]

Up for sale is a set of (4) Keskin KT1 Klassik Wheels. These came of my car, I've had them for close to three years and loved every minute on them. Finally moved on to a new set-up and have no use for these. Currently painted semi-gloss black inner barrels and Universal Gold faces. All four center caps and their securing hardware included. One center cap is missing a Keskin sticker.

Wheels have a few minor blemishes caused by a local tyre shop (repairable). Unsure how, but they denied damaging them. One of the fronts took the worst part, all blemishes are shown on photos. No bends. No cracks. No rust. No air leaks. Phenomenal staggered wheel set-up to set your car apart. I've included a few photos on the car showing fitment (I ran 10mm spacers up front).

Wheel Specs

5 x 120 / 5 x 112
Fornt: 17 x 8.5 ET 35
Rear: 17 x 10 ET 30
Made in Germany

Looking to get $750.00 for the wheels. Interested buyers PM me. Reasonable offers welcome.





Damage - one the front



Damage - One rear



















Thanks for looking.

[DatTugrut]

I'm liking these. What tire size are you running in the rear?

[Bane2000]

235/40/17 Primewell PZ900s, which run a little wide and gave me a nice meaty fitment/stretch.

BUMP

[Bane2000]

Bump

[Bane2000]

Tgif bump

[Bane2000]

These need a new home guys.

Sunday BUMP.

[Bane2000]

Spacers and Grilles Gone.

Wheels still need a new home.

BUMP

[BlueDemonR32]

Still available?

[usmanx]

235/40/17 Primewell PZ900s, which run a little wide and gave me a nice meaty fitment/stretch.

BUMP

I'm liking these.

[BlueDemonR32]

I just send you a message Andy. Thanks!

- - - Updated - - -

Send me a text Andy. 3367727414 Thanks!

[Bane2000]

Sorry I've been away from the forum and had't replied guys. Price dropped, new pics, all updates made to original post.

Still sitting in my garage and looking for a new home.

TGIF BUMP!!!

[Jroll3r]

Is $750 the new price drop?

- - - Updated - - -

Never mind, I reread your last post and realized I had a derp moment. Excuse my stupidity. Haha

[Bane2000]

Is $750 the new price drop?

Yes.

[Bane2000]

Bump

[JayE36328i]

Hi Andy,

I would have these wheels off you if I was in Texas!

I've managed to acquire the same set from Germany but need advice on tyres/spacers/arch work.

I'm guessing you needed the 10mm spacers up front to clear the coilovers?

How much arch work did you need to get these under the car? The fronts will probably fit nicely but the rears must have needed a big roll?

Can you advise tyres sizes front and rear? the stretch you have on those is just what I'm looking for!

Any changes to the stock camber? I have front plates and rear arms so can adjust as needed.

I have a 328i cabriolet which will be on coilovers very soon, currently have 8.5x18 ET47 on the rear and they rub a little when the car bottoms out so 17x10 will be interesting (no arch work yet)

Cheers
Jay

[Bane2000]

Jay, if you look through my threads you will find all the information you are looking for. I did not NEED the 10mm spacers, I chose to run them so the car would have a better stance.

Tires, cambers, fender work, etc... all in my early threads with this car.

Have fun with the set up, it is definitely a great balance between form & function.

[JayE36328i]

Hi Andy,

Yes, I found all the info from one of your earlier threads, the soy sauce makes me chuckle.

Many thanks

Jay

[JayE36328i]

Just to follow up on this, I rolled the rear arches and fitted the Keskins back in the summer:

20151011_175102.jpg

[Bane2000]

They look great Jay.