E36 M3/4/5 drag car build : Headway motor- GT40/94R -Boost Logic

[pbonsalb]

Do a solid axle domestic rear conversion and run an auto transmission.

[Butters Stoch]

Do a solid axle domestic rear conversion and run an auto transmission.

Sounds like a add in the news paper ..... "Drivers wanted " "No experience needed" also won't be listed in the standings. Must be BMW.

[GG///M3]

Car should do a 10 second pass, but the driver is in need of experience so i going to say 14 seconds, Tuning will be : RK Tuning 80lb blow thru/ VP ms109 Looking for 800-850 rwhp.

This is going to be good

[Butters Stoch]

This is going to be good

I will keep my 300k motor for him when he blows his up.

[Mod Addict]

This is going to be good

I was thinking if I was going to build another car, I would have to step it up a notch. Jordan's tune should work nicely in this situation as its time to make some serious horsepower.

[Mod Addict]

Motor is ready for removal ! Woohoo!!

Big Thanks to Tyler these last few days as he has helped out a lot and made the job much more easier..

[Butters Stoch]

I'm thinking your going to want at least 1000 wheel. Anything under will be embarrassing .
Oh and who is this Headway ?

[Mod Addict]

I'm thinking your going to want at least 1000 wheel. Anything under will be embarrassing .
Oh and who is this Headway ?

Nah
Just need a shoot and a 318 badge.

[pbonsalb]

I'm thinking your going to want at least 1000 wheel. Anything under will be embarrassing .
Oh and who is this Headway ?

I agree. When you are as used to 600 as Greg is, you think in terms of 200 or even 400 rwhp bumps to make a difference you would notice.

[Butters Stoch]

I agree. When you are as used to 600 as Greg is, you think in terms of 200 or even 400 rwhp bumps to make a difference you would notice.

Well , he has had 2 600 HP turbo E36s for a couple years now. So I only see it being worth all this work to add them together. I wouldn't accept anything under 1200. I'm sure if RK uses enough timing and Greg welds his WG shut we might be able to see a biblical run. In the end it will be all worth it.

[Mod Addict]

Well , he has had 2 600 HP turbo E36s for a couple years now. So I only see it being worth all this work to add them together. I wouldn't accept anything under 1200. I'm sure if RK uses enough timing and Greg welds his WG shut we might be able to see a biblical run. In the end it will be all worth it.

If it was possible to run mo powa i would but unfortunately the 4094 is out of steam. Maybe need a twin scroll & bigger back side or just bigger gerbils.

[Butters Stoch]

If it was possible to run mo powa i would but unfortunately the 4094 is out of steam. Maybe need a twin scroll & bigger back side or just bigger gerbils.

Well, the big time drag racers use a bigger turbo. So maybe sell the 4094 and go with a 4202 ?

[Mod Addict]

Well, the big time drag racers use a bigger turbo. So maybe sell the 4094 and go with a 4202 ?

Direct port nitrous is key for making power over 800 whp wirh a 40/94R

[GG///M3]

Direct port nitrous is key for making power over 800 whp wirh a 40/94R

Also a tuning fork

[t94blackcoupe]

[Mod Addict]

[IMG][/IMG]

[Butters Stoch]

Things look to be missing. Going for weight reduction ?

[GG///M3]

Things look to be missing. Going for weight reduction ?

Yes I'll take the motor that was removed at no extra charge.

[Mod Addict]

Things look to be missing. Going for weight reduction ?

Cant I just run the turbo ?

[dohcdoh]

Cant I just run the turbo ?

Pipe the compressor to the turbine side and inject fuel/affix a spark plug. Jet powered!

[Mod Addict]

- - - Updated - - -

[Butters Stoch]

That looks fancy. It needs a fancy ATI balancer too.

[GG///M3]

That looks fancy. It needs a fancy ATI balancer too.

Korrekt

[Turbo ///M50]

That motor looks real pretty

[pbonsalb]

It has been sitting in the garage waiting to be used for 5 years.