Drive shaft tunnel support brace bolt size?

[svt4me]

I have lost the 4 bolts that hold in the tunnel support brace, and it's driving me nuts not being able to find the correct size. Realoem.com did not have it. Google searches also brings up nothing, can someone give me the size please.

[rob22sf]

22326760945
M8X22-8.8-ZNS3 4
its for a stick FYI

found it on real oem
http://www.realoem.com/bmw/showparts...18&hg=23&fg=10

[svt4me]

Mine is an auto but I will try that size anyways, and that doesn't quite look like mine.

[BimmerBreaker]

If you are concerned it is incorrect go to an automatic E36 M3 and find the equivelent diagram for automatic transmissions

[rob22sf]

hence why I said its for an stick, didn't know what u had

[svt4me]

I did, there is not a diagram for it.

[BimmerBreaker]

I did, there is not a diagram for it.

Seriously? It took me all of 30 seconds to find it...

We are more willing to help those who help themselves... I could post the link to the diagram or the part # but ...teach a man to fish, right?

[hc1001]

Seriously? It took me all of 30 seconds to find it...

We are more willing to help those who help themselves... I could post the link to the diagram or the part # but ...teach a man to fish, right?

I know this is an old thread but the OP was asking for the driveshaft tunnel support brace and not the tranny support brace bolts. For some dumb reason, this brace was located under "Insulation" section

They are M8x16 bolts. Part# 07119915069

Part 15 on this diagram:
http://www.realoem.com/bmw/enUS/show...diagId=51_2047